Description
Steering Column Controls VALEO COM2003 For Citroën C5 II And Peugeot 407 With ESP. They Control Fog Lights, Trip Computer, No Rear Wiper, Rain Sensor, ESP. Used Part, The Turn Signal Stalk Is Usually A Bit Loose But Does Not Skip. Fully Functional.
High-quality used steering column control unit (stalk assembly) VALEO COM2003 designed for Citroën C5 II and Peugeot 407 models equipped with ESP. Ideal for professional workshops and DIY enthusiasts who search by OE numbers such as 96473051XT or 6242T0. This unit operates fog lights, the onboard trip computer, rain sensor input and ESP-related switching. The stalk is fully operational; occasional play in the turn-signal lever is noted but does not affect functionality.
Technical Information
- Manufacturer: Valeo
- Model: Citroën C5 II, Peugeot 407
- Product Codes: 96473051XT, 6242T0, COM2003
- Other Numbers: 6242Z6, 6242S6, NFP
Function And Application
This steering column control unit consolidates multiple driver controls into a single stalk assembly. Typical Functions Include:
- Activation Of Front Fog Lights
- Operation Of Trip Computer / Onboard Display Controls
- Integration With Rain Sensor (Input Signal)
- ESP Related Switch Signals
- Turn Signal And Light Flash Functions (Note: No Rear Wiper Control On This Version)
Replacement Procedure
Basic Replacement Steps For A Workshop Or Experienced DIYer:
- Disconnect The Battery Before Starting To Prevent Short Circuits And Airbag Deployment.
- Remove Steering Column Trim Panels To Access The Stalk Mounting Screws.
- Unscrew The Mounting Fixings And Carefully Pull The Stalk Assembly From The Column.
- Disconnect Electrical Connectors, Noting Clip Locations And Any Locking Tabs.
- Fit The Replacement Unit, Reconnect All Plugs, And Reassemble Trim Panels.
- Reconnect The Battery And Verify All Functions: Indicators, Fog Lights, Trip Computer Controls, Rain Sensor Response, And ESP Signals.
Installation Recommendations
- Always Disconnect The Battery Before Removal/Installation And Follow Manufacturer Procedures To Avoid Damage To The Unit Or Airbag System.
- Use Appropriate Screwdrivers And Torque Settings To Avoid Stripping Fasteners Or Cracking Trim.
- Inspect Electrical Connectors For Corrosion Or Bent Pins; Clean Contacts If Necessary Before Reassembly.
- After Installation, Run A Full Functional Check And Clear Any Stored Fault Codes Using Workshop Diagnostic Equipment If Required.
- If The Vehicle Has Steering Angle Or Sensor Calibration Procedures, Perform Those Steps Per Manufacturer Recommendations.
Most Common Failure Causes
- Mechanical Wear Of The Stalk Mechanism Leading To Increased Play Or A Loose Feeler.
- Contact Wear Or Oxidation On Internal Switch Contacts Causing Intermittent Signals.
- Moisture Ingress Or Contamination From Spills That Affect Electrical Contacts.
- Connector Damage Or Broken Wiring In The Column Area Due To Previous Repairs Or Improper Handling.
- Impact Damage From Airbag Deployment Or Steering Column Collision.
Notes For Mechanics And DIYers
This part Is Frequently Searched By OE Numbers (96473051XT, 6242T0, 6242Z6, 6242S6) And By The VALEO COM2003 Designation. Suitable For Citroën C5 II And Peugeot 407 Vehicles Equipped With ESP. The Unit Is Offered As A Used, Fully Functional Item; Observed Slight Play In The Indicator Stalk Does Not Affect Electrical Operation.
