Description
ESP Controller for Citroën C8 and Peugeot 807 up to 2004
This used ESP switch is intended for Citroën C8 and Peugeot 807 models produced up to 2004. It operates the Electronic Stability Program (ESP/ASR) control on the dashboard, allowing the driver to enable or disable traction and stability assistance. Frequently searched by part numbers 1488926077 and 6554G5, this unit is a direct-fit replacement for vehicles that use the same switch assembly and connector layout.
Key Benefits
Reliable restoration of ESP on/off control, maintenance-friendly replacement for workshop and DIY repairs, and improved driver confidence when the original switch has failed or become intermittent. Ideal for mechanics and experienced home repairers who search by OEM part number.
How The Part Works
The switch provides a user interface to the vehicle’s ESP/ASR system, sending a signal to the ABS/ESP control module to toggle traction and stability control functions. The component typically contains a microswitch and contact terminals that communicate with the vehicle wiring harness. It does not itself control braking or engine torque but acts as the command input to the main ESP module.
How To Replace
- Safety First: Disconnect the vehicle battery before starting to avoid short circuits and to protect vehicle electronics.
- Remove Trim: Carefully pry out the surrounding dash trim or switch cluster bezel using appropriate trim tools to avoid damage.
- Extract Switch: Unscrew or unclip the old switch from its housing and disconnect the electrical connector.
- Install New Switch: Plug in the replacement switch, secure it in the mounting bracket, and refit the trim.
- Reconnect Battery And Test: Reconnect the battery and verify correct function of the ESP indicator and On/Off operation while the ignition is on.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C8; Peugeot 807
- Product Codes: 1488926077, 6554G5
- Other Numbers: 1488926077 | 6554G5
Installation Recommendation
Always disconnect the battery before removing or installing electrical components. Use plastic trim tools to avoid scratching the dashboard. Check connector pins for corrosion or bent contacts and ensure a firm connection. After installation, confirm that the ESP system warning lamp behaves normally during ignition sequence and road test. If fault codes persist, read the ABS/ESP control unit with a diagnostic tool and clear codes as required.
Why This Part Most Commonly Fails
Failure Typically Results From Wear Of The Internal Microswitch, Oxidation Or Corrosion Of Contact Terminals, Mechanical Damage From Frequent Use Or Impact, And Ingress Of Moisture Or Dirt Behind The Dash. Intermittent Operation Or Complete Loss Of Function Is Common After Many Years Of Service.
Notes For Buyers
Because this item is commonly searched by OEM number, listing the part number (1488926077 / 6554G5) in your search improves findability. Suitable For Workshop Replacement Or Experienced DIY Installation. Check Physical Match With Existing Switch Housing And Connector Before Fitment.
