Description
Passenger airbag switch for Citroën C1, C2, C3 and C3 Pluriel, and Peugeot 607.
Product Overview
This passenger airbag switch is a direct-fit component used in select Citroën and Peugeot models. It allows the passenger airbag to be manually enabled or disabled when required (for example when a rear-facing child seat is installed). Commonly searched by part numbers 96373215XT, 95835T02 or 8216E6, this switch is designed for professional workshops and experienced DIY enthusiasts who carry out interior and safety system repairs.
Function And Benefits
- Controls the activation state of the front passenger airbag (ON/OFF) via a keyed or rocker switch integrated into the dashboard or glovebox area.
- Essential when transporting infants in rear-facing child seats on the front passenger position where permitted by local regulations.
- OEM-style fit improves reliability and maintains correct connector interfaces with the vehicle wiring loom.
- Search-optimized: frequently looked up by part numbers 96373215XT, 95835T02 and 8216E6.
Fitment and Compatibility
Compatible with the following models (as indicated by original listings):
- Citroën C1
- Citroën C2
- Citroën C3
- Citroën C3 Pluriel
- Peugeot 607
Installation — General Guide
Replacement is straightforward for trained technicians and competent DIYers familiar with vehicle interiors and safety systems. Typical procedure:
- Park vehicle on a level surface, switch off ignition and remove key.
- Disconnect the negative battery terminal and wait a few minutes to ensure airbag system capacitors discharge.
- Remove required trim panels (glovebox or dashboard bezel) using plastic trim tools to avoid damage.
- Locate the airbag switch assembly, unplug the electrical connector and remove the retaining fastener(s).
- Fit the new switch, reconnect the connector and reassemble trim in reverse order.
- Reconnect the battery and verify correct operation: ensure the airbag indicator behaves as expected and the switch changes the passenger airbag state. Use a diagnostic tool to read/clear any related fault codes if necessary.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C1, Citroën C2, Citroën C3, Citroën C3 Pluriel, Peugeot 607
- Product Codes: 96373215XT, 95835T02, 8216E6
- Other Numbers: 8216000000
Recommendation For Installation
- Always disconnect the battery before removing or installing any airbag-related component.
- Use non-marring trim tools to prevent damage to panels and clips.
- Inspect the wiring harness and connector for corrosion, bent pins or heat damage and repair as necessary before fitting the new switch.
- After installation, verify the airbag indicator lamp and use a suitable diagnostic scanner to confirm there are no stored faults related to the occupant restraint system.
- If unsure about procedures or if faults persist, have the vehicle checked by a qualified technician with the appropriate diagnostic equipment.
Why This Part Fails
Common failure causes include mechanical wear of the switch mechanism from repeated use, contamination or corrosion of electrical contacts (especially in vehicles exposed to moisture), damage from interior impact or previous airbag deployment, and connector pin damage. Failure typically presents as the inability to change the airbag state, intermittent operation, or related fault codes appearing on the dashboard.
Searching by part numbers 96373215XT, 95835T02 or 8216E6 will help you quickly locate the correct replacement. Suitable for professional workshops and experienced DIY mechanics who need a reliable passenger airbag switch for Citroën and Peugeot models listed above.
