Description
Wiper stalk for front and rear wiper control located under the steering wheel for Citroën and Peugeot vehicles. It originates from Peugeot 406.
This replacement wiper stalk (stalk switch) operates both front and rear windshield wipers and is suitable for a range of Citroën and Peugeot models. Designed for professional garages and DIY mechanics who often search by part number, this unit appears under the OEM references 96205589ZL and 6239A7. The switch provides reliable manual control of intermittent, low and high wiper speeds as well as rear wiper and washer activation where applicable.
Compatible Models
- Peugeot 206
- Peugeot 406
- Citroën Berlingo I
- Peugeot Partner II
- Citroën Xsara
- Citroën Xsara Picasso
Technical Information
- Manufacturer: Stellantis / Citroën / Peugeot
- Model: Peugeot 206, Peugeot 406, Citroën Berlingo I, Peugeot Partner II, Citroën Xsara, Citroën Xsara Picasso
- Product Codes: 96205589ZL, 6239A7
- Other Numbers: 6239A7 | 96205589ZL
Function
The wiper stalk is the driver control interface for windshield wipers and washers. It selects intermittent, low and high speeds for the front wipers, engages the rear wiper and washer where fitted, and often integrates the intermittent timing and wash pulse functions. It transmits user inputs to the vehicle’s wiper motor and related relays/electronics.
Replacement Procedure
Basic replacement steps for experienced technicians or confident DIYers:
- Disconnect the negative battery terminal to prevent short circuits or airbag deployment.
- Remove steering column trim panels to access the stalk mounting and electrical connector.
- Unplug the electrical connector and release any retaining clips or screws securing the stalk.
- Remove the old stalk, fit the replacement unit, and secure with the original fasteners.
- Reconnect the electrical connector, reassemble the column covers and reconnect the battery.
- Verify all wiper and washer functions (front/rear, intermittent, speeds) before returning the vehicle to service.
Installation Recommendations
- Work with the battery disconnected and follow vehicle-specific airbag safety procedures.
- Check connector pins for corrosion or damage; clean contacts if necessary before installation.
- Avoid forcing plastic clips; use correct trim tools to prevent damage to column covers.
- Test functionality fully before closing the steering column covers to ensure correct operation.
Why The Part Most Commonly Fails
Wiper stalks wear out primarily from frequent mechanical use and electrical contact wear. Common failure causes include worn internal contacts causing intermittent or non-functional switch positions, moisture ingress and corrosion of connector pins, plastic fatigue or breakage of the stalk or mounting points, and electrical arcing that degrades contact surfaces. Vehicles with high mileage, heavy wiper use or exposure to damp conditions are more prone to failure.
Searchable by OEM codes 96205589ZL and 6239A7 — verify the reference number against the part required for your specific model before ordering.
