Description
Electric central locking actuator for the front passenger door for Peugeot 308 vehicles.
Product Overview
Used electric door lock for the front passenger (right front) door of the Peugeot 308. This actuator operates the central locking mechanism, allowing remote and central locking functions to lock and unlock the passenger door. Frequently searched by product numbers, this unit is listed under codes such as A04958, 006165, 9136CR and 9800616580 — include these codes when searching to find exact matches.
Technical Information
- Manufacturer: Stellantis (Peugeot)
- Model: Peugeot 308
- Product Codes: A04958, 006165, 9136CR
- Additional Numbers: 9800616580, 9136.CR
Function
The unit is an electric central locking actuator integrated into the door latch assembly. It converts electrical signals from the central locking system into mechanical movement to lock or unlock the door. Proper operation is essential for remote locking, deadlocking and for door status sensors used by the vehicle’s body control systems.
Replacement Procedure
- Disconnect the battery before starting work to avoid short circuits and unintended airbag/seatbelt system activation.
- Remove the interior door trim carefully: unscrew fasteners, detach clips and lift the trim away to access the latch area.
- Disconnect the electrical connector for the door lock actuator and any Bowden cables or rods attached to the latch mechanism.
- Unscrew the fastening bolts securing the latch/actuator assembly and remove the old unit from the door shell.
- Install the replacement actuator in reverse order: position the latch, tighten bolts to manufacturer torque where available, reconnect rods and electrical connector, then refit the door trim.
- Reconnect the battery and check full function of central locking, remote control and interior lock/unlock lever.
Installation Recommendations
- Always Disconnect The Battery Before Demounting/Mounting To Protect Electronic Systems.
- Handle Wiring Harness Connectors With Care; Clean Corroded Contacts Before Reconnection.
- Check Door Locking Rods And Clips For Wear Or Breakage And Replace If Damaged.
- When Tightening Fasteners, Use Correct Torque Values If Known To Avoid Distortion Of The Latch Assembly.
- After Installation, Cycle The Lock Several Times And Verify That The Door Fully Latches And That Central Locking Signals Are Correctly Received.
Most Common Failure Reasons
Door lock actuators commonly fail due to moisture ingress and corrosion, worn or broken plastic gears inside the actuator, seized or damaged latch linkages, and electrical connector corrosion or broken wiring. Symptoms of a failing unit include intermittent locking/unlocking, the door failing to lock with the remote, unusual noises coming from the door when operating the lock, or the door not latching properly.
Who Is This For
Designed for professional mechanics and competent DIYers who maintain Peugeot vehicles. Search by product codes (A04958, 006165, 9136CR, 9800616580) to locate matching units quickly in parts catalogs or online listings.
