Description
Left Roof Airbag for Peugeot 308 First Series. Side – Driver
Product Overview
OEM Roof (Curtain) Airbag designed for the Driver Side of Peugeot 308 First Series. This safety-critical component is referenced under part numbers 9676859780 and 8338U8 and is intended for technicians and DIY enthusiasts who perform SRS repairs and interior replacements. The unit restores head protection in side impacts and rollovers and must be fitted according to manufacturer procedures to ensure full functionality of the Supplemental Restraint System.
Compatibility And Fitment
Fits Peugeot 308 First Generation (T7) models, commonly produced 2007–2013. Always verify physical fitment and connector type before installation by comparing the part and part numbers. Commonly searched using: 9676859780, 8338U8, Peugeot 308 airbag curtain, driver side roof airbag.
Function
The Roof/Curtain Airbag Deploys Along The Roofline To Protect Occupant Heads During Side Impact Or Rollover Events. It Works In Conjunction With Side Impact Sensors, Seatbelts And The SRS Control Unit To Provide Timely Deployment. A Correctly Installed Airbag Ensures Energy Dissipation And Reduces Risk Of Severe Head Injury.
How To Replace
- Safety First: Disconnect The Battery And Wait At Least 10 Minutes To Allow SRS Capacitors To Discharge.
- Remove Interior Trim Panels And Headliner Sections Necessary To Access The Roof Airbag. Keep Fasteners Organized.
- Unplug The Airbag Connector Carefully Using The Appropriate Release Tool Or Tab; Avoid Pulling On Wires.
- Unbolt The Airbag Module From Its Mounting Points And Remove The Unit.
- Install The New Airbag In Reverse Order: Secure Mounting Bolts To Manufacturer Torque Where Specified, Reconnect The Connector Firmly, Refit Trim.
- Reconnect Battery And Use A Suitable Diagnostic Tool To Read/Clear SRS Fault Codes And Verify System Status.
- Perform A Road Check And Confirm No SRS Warning Light Remains On The Dashboard.
For Safe Handling: Always Store Airbag Modules With The Inflator Facing Away From Personnel And Do Not Subject The Unit To Heat Or Impact.
Most Common Failure Reasons
- Previous Deployment In A Collision – Airbag Is Single-Use And Must Be Replaced After Any Deployment.
- Damage During Repairs Or Interior Work – Connector Damage Or Incorrect Reassembly Can Cause Open/Short Faults.
- Water Ingress Or Corrosion At Connectors Leading To Intermittent Electrical Faults.
- SRS Wiring Harness Damage Or Faulty Crash Sensors Causing System To Disable The Airbag Circuit.
- Age-Related Connector Oxidation Or Mechanical Wear From Repeated Trim Removal.
Replacement Frequency
Airbags Have No Scheduled Service Interval. Replacement Is Required After Deployment Or When A Persistent, Diagnosed SRS Fault Indicates The Module Or Its Connections Are Compromised.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 308 I (First Series, 2007–2013)
- Product Codes: 9676859780, 8338U8
- Other Numbers: OE Reference 96 768 597 80
Installation Recommendations
Disconnect The Battery Before Any Work On The SRS System And Observe Manufacturer Safety Intervals. Use Proper Trim Tools To Avoid Damaging Plastic Clips And Wiring. Verify Connector Locking Mechanisms Are Fully Engaged. After Installation, Clear SRS Codes With A Diagnostic Tool And Confirm That The SRS Indicator On The Instrument Cluster Goes Out. If The Airbag Light Persists, Recheck Connections And Consult A Professional With PSA Diagnostic Equipment.
Why This Part Is Important
Roof/Curtain Airbags Provide Crucial Head Protection In Side Impacts And Rollovers. Using Correct-Fit Parts With Matching Connectors And Part Numbers Ensures Reliable Deployment Characteristics And Restores The Vehicle To Its Designed Safety Level.
Notes For Professionals And DIY Enthusiasts
This Description Uses Known OEM References To Aid Search And Fitment. Installation Should Be Performed By Qualified Personnel Or Experienced DIYers Following Safety Procedures. Always Use Diagnostic Equipment To Confirm System Integrity After Replacement.
