Description
Window And Mirror Switch For Peugeot 406 Vehicles
Replace or upgrade the central driver-side control with this genuine-style Window And Mirror Switch tailored for the Peugeot 406. Designed for professional workshops and competent DIY mechanics, this switch (code 6554CF) controls power windows and electric mirror adjustment/folding functions from the driver door. Clear fitment identification by product code makes ordering fast — search for 6554CF to find the exact replacement. The robust design ensures reliable day-to-day operation and straightforward installation in most Peugeot 406 variants.
Features And Functionality
This unit Operates The Driver-Side Window Controls And Mirror Adjustment/Folding Functions. Typical Functions Include Individual Window Up/Down Control, Childlock/Window Lockout Option (depending on vehicle specification) And Electric Mirror Adjustment. The Switch Is Intended To Replace A Worn Or Faulty Door Control Module And Restores Full Manual Control Over Windows And Mirrors Without Requiring Replacement Of The Door Wiring Harness.
Technical Information
- Manufacturer: Stellantis (Citroen/Peugeot)
- Model: Peugeot 406 (Sedan / Coupe / Estate) 1995-2004
- Product Codes: 6554CF
- Additional Numbers: Not Available
Installation Recommendation
Recommended For Installation By Experienced Mechanics Or Competent DIYers. Typical Replacement Steps:
- Disconnect The Battery Before Starting To Prevent Short Circuits.
- Remove The Door Trim Panel By Releasing Clips And Unscrewing Fixings; Keep Fasteners For Reassembly.
- Carefully Pry Out The Switch Bezel And Unscrew Any Retaining Screws.
- Unplug The Electrical Connector(s) From The Old Switch And Note Connector Orientation.
- Install The Replacement Switch, Reconnect The Connector(s) And Check That All Functions Work (Windows Up/Down, Mirror Adjust/Fold).
- Reassemble The Door Trim Panel And Reconnect The Battery. Test All Functions Again Before Road Use.
Estimated Time: 30–60 Minutes. Use Trim Removal Tools To Avoid Panel Damage. Check Wiring And Connector Pins For Corrosion; Clean Contacts If Necessary.
Most Common Failure Causes
- Mechanical Wear Of Buttons And Internal Contacts Due To Frequent Use.
- Oxidation Or Corrosion On Connector Pins From Moisture Ingress.
- Contamination By Dirt Or Spilled Liquids Causing Intermittent Contact.
- Electrical Overload From A Sticking Window Regulator Motor Or Short Circuit In The Door Wiring.
- Broken Solder Joints Or Internal Plastic Fatigue After Many Cycles.
Practical Advice
When Replacing The Switch, Inspect The Window Regulator And Motor For Smooth Operation — A Faulty Regulator Can Increase Current Draw And Accelerate Switch Failure. If The Connector Shows Corrosion, Clean With Contact Cleaner And Apply Dielectric Grease To Protect Pins. Always Test All Window And Mirror Functions Before Final Reassembly.
Why Choose This Part
Supplied To Fit The Peugeot 406 And Identified By Product Code 6554CF, This Switch Is A Direct Replacement That Restores Control Functions Quickly, Minimizing Vehicle Downtime. Its Clear Product Code Makes It Easier To Order The Correct Item For Workshops That Frequently Service Peugeot 406 Vehicles.
