ABS ESP Unit Citroën Peugeot 0265956353 9812786180

Description

ABS and ESP Control Unit BOSCH for Stellantis vehicles. From a car with 33,000 km mileage.

Product Overview

This Bosch ABS/ESP control unit (0265956353) is a direct-fit electronic module used on various Stellantis models including Citroën Berlingo III, Peugeot Partner III, Peugeot Rifter, Opel Combo E and Fiat Doblo III. The unit manages Anti-Lock Braking (ABS) and Electronic Stability Program (ESP) functions, processing wheel speed sensors and controlling the hydraulic modulator to maintain vehicle stability and braking performance. Common reference numbers: 0265956353, 9812786180, 1654078580, 265956353 — customers often search by these codes.

Technical Information

• Manufacturer: Bosch
• Model: Stellantis Vehicles (Citroën Berlingo III, Peugeot Partner III, Peugeot Rifter, Opel Combo E, Fiat Doblo III)
• Product Codes: 0265956353
• Other Numbers: 9812786180, 1654078580, 265956353

Compatibility

Designed for use on multiple Stellantis platform vehicles. Typical compatible models include:

• Citroën Berlingo III (K9)
• Peugeot Partner III
• Peugeot Rifter
• Opel Combo E (K9)
• Fiat Doblo III

Installation Recommendations

• Always disconnect the battery before starting removal to avoid electrical damage and airbag/ABS faults.
• Follow the vehicle manufacturer’s removal and installation procedure; secure connectors and mounting bolts to correct torque values.
• After mechanical installation, bleed the brake system thoroughly and prime the hydraulic circuit following the manufacturer’s sequence to remove air from the ABS modulator.
• Use an ECU-capable diagnostic tool to clear stored fault codes, run ABS pump priming routines and verify wheel-sensor inputs. Some functions may require initialization or adaptation procedures.
• Inspect associated wiring harnesses, ground points and wheel speed sensors for corrosion or damage when replacing the unit.

Most Common Failure Causes

• Water Ingress And Corrosion: Moisture intrusion into connectors or the electronic housing can cause intermittent faults or permanent failure.
• Electrical Surges Or Poor Grounding: Voltage spikes or loose ground connections can damage internal electronics.
• Hydraulic Wear Or Contamination: Debris or degraded brake fluid can affect the hydraulic modulator and pump operation.
• Connector And Harness Damage: Physical damage during repairs or from road debris can interrupt sensor signals or power supply.

Practical Notes For Mechanics And DIYers

This unit is a key safety component. If replacing with a used unit, verify physical condition, connector integrity and absence of corrosion. After fitment, confirm ABS/ESP functions on a test drive at low speed and check for stored fault codes. Retain original part numbers (0265956353, 9812786180, 1654078580) when searching for replacements to ensure compatibility.