Description
Tool kit including jack, wheel wrench, towing eye, with body-mounted holder. Suitable for Citroën C3 Picasso, C4 and C4 II (B7), Peugeot 207, 308, 301 and 3008.
This compact emergency tool set is an essential accessory for professional mechanics and DIY enthusiasts working on Citroën and Peugeot models. The kit is designed for convenient storage in the vehicle body holder and contains the basic equipment needed for wheel changes and roadside towing: a compact jack (typically scissor type), a sturdy wheel wrench for loosening and tightening lug nuts, a threaded towing eye and a mounting bracket that secures the tools inside the trunk. Many customers search by product codes, so this item is commonly listed under 673695, 672594 and 671739 — include these codes when searching to find the correct replacement quickly.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot OEM)
- Model: Citroën C3 Picasso; Citroën C4; Citroën C4 II (B7); Peugeot 207; Peugeot 301; Peugeot 308; Peugeot 3008
- Product Codes: 673695, 672594, 671739
- Other Numbers: 671739 | 672594 | 673695
How To Use And Install
Using the kit: Before lifting the vehicle, park on a firm, level surface, apply the parking brake and place wheel chocks on the opposite wheel. Loosen wheel nuts slightly while the car is still on the ground. Position the jack under the vehicle’s designated jacking point (refer to the vehicle owner’s manual for exact locations), then raise the car until the wheel is off the ground. Remove the wheel nuts and wheel, perform the repair or replacement, refit the wheel, tighten nuts by hand, lower the vehicle and torque nuts to the correct specification.
Attaching the towing eye: The towing eye screws into a threaded receptacle located behind a removable cover in the front or rear bumper. Screw the towing eye fully by hand until it seats securely before attaching a tow hook or strap.
Fitting the holder: The tool holder clips or bolts into a dedicated location in the boot/trunk lining. Align the bracket with the vehicle mounting points and press or fasten until it locks. Ensure the kit is secured to prevent movement during driving.
Installation Recommendations
- Always consult the vehicle owner’s manual for jacking points and torque values.
- Loosen wheel nuts slightly before raising the vehicle and never place any part of your body under the car supported only by the jack.
- Use wheel chocks and apply the parking brake; if possible, work on a flat, level surface.
- Check towing eye threads before use; if threads are damaged, do not use for towing.
- After use, clean and dry the tools and return them to the holder to prevent corrosion and rattling noises.
Most Common Failure Reasons
Tool kits of this type rarely “fail” mechanically but problems are common due to wear, corrosion, misuse or loss. Typical issues include:
- Corrosion Of Jack Screw Or Wrench: Prolonged exposure to moisture or road salt can seize screw mechanisms and corrode metal components.
- Stripped Towing Eye Threads: Cross-threading or forcing a damaged towing eye can ruin the thread in the bumper receptacle.
- Damaged Or Bent Wrench/Jack: Misuse, overloading or improper positioning of the jack can bend components and reduce safety.
- Missing Parts Or Loose Holder: Tools can be lost or the mounting bracket can break, leaving the kit unsecured in the trunk.
Maintenance Tips
- Inspect the kit periodically for corrosion, thread damage and secure mounting.
- Lubricate the jack screw with light grease to keep the mechanism operating smoothly.
- Store the kit dry and secured in the holder to avoid rattles and moisture buildup.
- Replace any damaged components promptly to maintain safe roadside equipment.
Keywords for search and compatibility: Citroën C3 Picasso tool kit, Citroën C4 jack kit, Citroën C4 II B7 tools, Peugeot 207 towing eye, Peugeot 308 jack, product codes 673695 672594 671739.
