Description
Right side roof airbag for Peugeot 3008 and 5008 first generation — passenger side.
Description
This right side roof (curtain) airbag is a direct-fit safety component intended for the passenger side of first-generation Peugeot 3008 and Peugeot 5008 models. Identified commonly by OE number 9801631380, the curtain airbag deploys from the roof rail in side impacts or rollovers to reduce head and upper-torso injuries. The unit installs along the A- and B-pillar roofline and integrates with the vehicle’s SRS wiring and connectors. Ideal for professional workshops and experienced DIY mechanics who require an OEM-compatible replacement part.
Technical Information
- Manufacturer: Stellantis (Peugeot)
- Model: Peugeot 3008 I, Peugeot 5008 I
- Product Codes: 9801631380
- Additional Numbers: —
- Side: Passenger (Right)
How To Replace
- Disconnect the negative battery terminal and wait at least 10 minutes to allow SRS capacitors to discharge.
- Carefully remove interior trim and headliner sections to access the roof rail mounting points (retain fasteners and clips).
- Unbolt the airbag module from the roof rail, disconnect the SRS connector(s) using careful handling to avoid damaging pins.
- Fit the replacement airbag, secure with the original fasteners to manufacturer torque values, reconnect the SRS connector and reassemble trim.
- After installation, clear airbag faults and verify SRS system status using a suitable diagnostic tool; confirm airbag warning light behavior.
Installation Recommendations
- Always disconnect the battery before starting work and follow the vehicle manufacturer’s safety procedures.
- Handle connectors and inflator housings with care; do not apply power or attempt to test the airbag outside the vehicle.
- Use a diagnostic tool capable of reading and clearing SRS fault codes after fitting; if faults persist, have the vehicle inspected by a qualified technician.
- Replace any damaged trim clips or fasteners to ensure correct fitment and curtain deployment path.
- Recommended for installation by professional workshops or experienced mechanics due to safety-critical nature of the component.
Why This Part Most Often Fails
- Deployment in a previous collision — once deployed the airbag must be replaced.
- Damage to wiring or connectors (corrosion, wear, rodents, or previous improper repairs) leading to SRS faults.
- Physical damage to the inflator or housing from interior work, accidents, or water ingress around trim joints.
- Incorrect removal or reinstallation causing connector pin damage or improper securing of the module.
Compatibility And Notes
Fits first-generation Peugeot 3008 and 5008 models where OE number 9801631380 is specified. Always verify the OE number compatibility from the vehicle’s parts documentation before ordering. This airbag is a safety-critical component; correct fitment and SRS system reset are essential for safe operation.
