Description
Driver’s seat airbag for Citroën Xsara Picasso. Color HZM – BISE
This Left Side Driver’s Seat Airbag is designed for Citroën Xsara Picasso vehicles and is commonly referenced by part numbers 96472197ZM and 8216S6. The unit is an original equipment fitment style interior airbag module intended to restore occupant protection after deployment or to replace a faulty seat airbag circuit. Suitable For Professional Mechanics And Experienced DIYers, The Part Is Often Searched By Its Product Codes, So Listing Those Numbers Helps Fast Identification.
Product Function And Application
The module is a side/seat airbag installed in the Driver’s Seat (left side). Its primary function is To Protect The Torso And Pelvis In Side-Impact Collisions By Rapidly Inflating To Absorb Energy And Reduce Injury. It Works As Part Of The Vehicle SRS (Supplemental Restraint System) Together With Seatbelt Pretensioners And Crash Sensors. Fitment Is Intended Specifically For Citroën Xsara Picasso Seats Where The Seat Has The Correct Mounting And Connector For This Airbag Type.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Xsara Picasso (Driver’s Seat, Left Side)
- Product Codes: 96472197ZM, 8216S6
- Other Numbers: 8216.S6, 8216S6, 96472197ZM
- Color: HZM – BISE (as marked)
Installation Recommendations
Safety First: Always Disconnect The Battery Before Starting Work And Wait At Least 10 Minutes To Allow The SRS System To Discharge. Follow Manufacturer Procedures To Avoid Accidental Deployment. Remove Seat Trim And Access Covers Carefully To Expose The Airbag Module. Disconnect The Airbag Connector Using The Correct Release Tool; Avoid Pulling On Wires. Unbolt The Old Module From The Seat Frame And Fit The Replacement In The Same Orientation. Reconnect The Airbag Connector Firmly, Refit Trim, And Torque Seat Fasteners To Manufacturer Specifications. After Reconnection, Reconnect The Battery And Check The SRS Warning Light With A Diagnostic Tool; Clear Fault Codes Only After Confirming Proper Installation.
Why This Part Most Often Fails
Airbags Are Not Wear Items; They Typically Require Replacement After Deployment In A Collision. Other Common Causes Of Faults Include Connector Damage Or Loose Connections During Seat Removal, Wiring Harness Corrosion, Moisture Ingress From Seat Spills Or Leaks, And Electrical Faults Reported By The SRS Control Unit. Incorrect Handling Or Impact Damage To The Seat Structure Can Also Compromise The Airbag Module.
Practical Notes For Buyers
There Is No Regular Service Interval For Seat Airbags — Replacement Is Required Following Deployment Or When The SRS System Reports A Confirmed Fault Related To The Seat Airbag Circuit. When Searching For This Part, Use The Product Codes 96472197ZM And 8216S6 To Ensure Correct Match With The Seat And Connector Type. Installation Is Straightforward For Experienced Mechanics, But Correct Handling And Diagnostic Verification Are Essential To Restore Full SRS Functionality.
