Right rear window mechanism Citroën C4 5-door 9647444280 922489

€36.00

Stellantis CITROEN PEUGEOT
9647444280 922489 9224H3

1 in stock

SKU: 9959-A8_K26 Categories: , , Tags: , ,

Description

Right rear window regulator mechanism for first-series CITROËN C4 5-door vehicles
Door behind the front passenger

Part description

This used right rear window regulator mechanism for the first-series Citroën C4 in the five-door version guides and moves the window glass in the door behind the front passenger. It is a suitable choice when repairing a non-functioning or mechanically damaged window regulator, provided the fault is actually with its mechanism.

When selecting a replacement, compare in particular the product numbers 9647444280, 922489 and 9224H3, as well as the mechanism design and its mounting points, with the original part. The information provided does not specify whether an electric motor is included; therefore, the contents of the assembly cannot be inferred from the window regulator designation alone.

Technical information

  • Manufacturer: not specified; the information provided lists the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën C4.
  • Vehicle version: first series, 5 doors.
  • Location: right rear door, behind the front passenger.
  • Part type: window regulator mechanism.
  • Condition: used automotive part.
  • Additional number: 9224H3.
  • Electric motor included: not specified.

Product codes

  • Product codes: 9647444280, 922489, 9224H3.

These numbers are an important reference when looking for a replacement mechanism. Before installation, also compare the door side, design and mounting points of the original and replacement parts.

Installation recommendations

The following procedure is general and typically applies to replacing a window regulator mechanism. The exact procedure for removing the door trim, releasing the glass and securing the mechanism depends on the specific vehicle version. Follow the manufacturer’s service procedure.

1) Before installation

  • First, verify the cause of the fault. A non-functioning window does not necessarily mean the mechanism is damaged; the problem could also be with the controls, power supply or electric motor.
  • Compare the part markings, assembly shape, mounting points and method of securing the glass. If the assembly includes electrical components, compare their connections as well.
  • Check the used part for deformation, cracks, corrosion and the condition of moving parts. For a cable-operated version, inspect the cables, their routing and how they are seated.
  • Prepare a secure way to prevent the glass from falling. Do not disassemble or operate the mechanism freely outside the door without support and without following the procedure specified by the manufacturer.

2) Tools and materials required

  • Standard hand tools suitable for the fasteners used, and tools for carefully releasing the trim.
  • Equipment designed to safely support and secure the glass.
  • Protective gloves, safety glasses and suitable protection for the paintwork and interior.
  • Cleaning supplies and, if necessary, materials for restoring the seal of the inner protective film, depending on the door design.
  • If riveted joints are used, appropriate equipment to remove and replace them according to the service procedure.

3) Step-by-step installation procedure

  1. Park the vehicle securely and ensure there is sufficient working space by the right rear door.
  2. If possible and safe, position the glass to allow access to its mounting points. Do not use force if the mechanism is jammed.
  3. Switch off the ignition and, before working on electrical connections, disconnect the battery according to the vehicle manufacturer’s instructions.
  4. Carefully remove the door trim. Disconnect the relevant connectors and controls without pulling on the wires.
  5. Access the mechanism and carefully move aside any protective film or moisture barrier. Note the wiring route and the position of the mounting points.
  6. Support the glass securely, disconnect it from the mechanism and secure it against slipping, following the service procedure.
  7. Disconnect any electrical connection to the mechanism, release its fasteners and remove the old part without damaging the glass, wiring or door.
  8. Compare the two parts side by side. If the electric motor or other original components need to be transferred, follow only the service instructions for the specific version.
  9. Insert the replacement mechanism and secure it at the appropriate mounting points. Ensure it is seated correctly without tension and that the moving parts can travel freely.
  10. Position and secure the glass. Check that it is correctly seated in the guides, and remove the temporary support only once it is securely fastened.
  11. Reconnect the electrical connections and reconnect the battery according to the manufacturer’s procedure. During testing, keep hands and tools clear of the path of the glass and mechanism; stop movement immediately if the glass becomes misaligned or meets unusual resistance.
  12. After a successful test, restore the seal of the protective barrier, correctly position the wiring and refit the door trim.

4) Post-installation checks and function test

  • Check several times that the window moves up and down smoothly. The glass must not become misaligned, stick or come loose from its mounting.
  • Listen to the mechanism in operation and check for cracking, scraping or knocking sounds.
  • Check that the glass closes properly and that the relevant controls work. If the specific version requires window initialization, perform it according to the manufacturer’s instructions.
  • Check the fit of the trim and moisture barrier. If taking a short test drive, check for vibrations or unusual wind noise.

5) Common installation mistakes and how to avoid them

  • Glass not secured adequately: always support it securely and prevent it from falling before releasing the mechanism.
  • Mechanism installed under tension: before final tightening, check that the assembly and glass are correctly seated in their guides.
  • Forcing the window or repeatedly operating a jammed window: stop if you encounter resistance and identify the cause, otherwise further damage may occur.
  • Pinched wiring or incorrectly connected connectors: maintain the correct wiring route and check that the connections are secured.
  • Protective film not sealed: after working on it, restore its correct adhesion and seal to prevent water from reaching the trim.

Reasons why the part may become damaged

The following are general causes of damage that can affect window regulator mechanisms; they do not describe the condition found on this particular part:

  • Wear of moving parts through prolonged use, including sliders and guides, as well as cables in cable-operated mechanisms.
  • Increased resistance when moving the glass due to dirty guides, damaged seals or incorrect positioning.
  • Attempts to lower a frozen or blocked window, which place excessive strain on the mechanism.
  • Moisture and corrosion, especially if the protection inside the door is damaged or water drainage is restricted.
  • Impact to the door or an unprofessional previous repair, which can cause deformation or misalignment of the mounting points.
  • Continuing to use the window despite the first signs of a fault, such as cracking, uneven movement or misalignment of the glass.

Additional information

Weight 2 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.