Peugeot 308 left rear window retractor 9680979080 9223E5

Description

Lower left rear window mechanism for PEUGEOT 308 T7 cars
The motor can be bought extra
Door behind the driver

Part description

The used rear left window pull-down mechanism is intended for the Peugeot 308 T7. It is an important part for the correct movement of the window filling, which ensures smooth lowering and pulling out of the glass. This type of part is also often searched for according to the manufacturer’s designation, so we also include exact numbers in the description for easier tracking.

The offer includes the mechanism itself, while the motor can be bought extra. The part is suitable as a replacement in case of failure of the original puller, binding of the drive, damage to the cables or limited function of the rear window on the side behind the driver.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 308 T7
• Other numbers: NFP

Product codes

• Product codes: 9680979080, 9223E5
• Models from labels/backgrounds: Peugeot 308

Installation recommendations

Generally/typically for this type of part, the exact method of replacement may vary depending on the specific design of the door and the equipment of the car. Before assembly, it is therefore always advisable to compare the new and original piece and to proceed with caution in order not to damage the door panel, glass or electrical connectors.

1) Before assembly

• Check that the left back, the shape of the mechanism, the attachment and the guide match.
• Compare the codes 9680979080 and 9223E5 with the old part if they are readable on the original part.
• Check the condition of the drives, cables, mounts and mounting points.
• If you are transferring the original motor, check its functionality and the condition of the connector.
• Make sure that the guiding parts have not broken or the mechanism has been deformed during disassembly or transport.

2) Necessary tools and materials

• A common set of hand tools
• Screwdrivers and plastic levers for panel removal
• Ratchet with regular attachments
• Work gloves
• Detergent for removing dirt
• Alternatively, a suitable lubricant for moving parts, if this is common and appropriate for the given solution

3) Step-by-step assembly procedure

1. Disconnect the car’s power supply if the situation and structure require it, and prepare safe access to the door.
2. Remove the inner lining of the rear left door carefully so as not to damage the upholstery, handles and covers.
3. Disconnect the electrical connectors that prevent access to the window retract mechanism.
4. Secure the glass against spontaneous movement so that it does not fall and get damaged during work.
5. Release the original mechanism from its attachment points and carefully remove it from the door.
6. Compare the disassembled part with the delivered part – especially the position of the attachment, the guide and the places for mounting the motor.
7. If the motor is transferred from an old part, mount it carefully on the new mechanism and check that it fits correctly.
8. Insert the mechanism into the door, place it in the correct position and gradually fasten it at all mounting points.
9. Connect the window to the mechanism according to the design of the given design and check that the glass is seated straight.
10. Connect the electrical connector of the motor if used.
11. Before fully folding the door, test the smoothness of the movement of the window in its entire range.
12. After verifying the function, return the protective elements, door trim and all dismantled parts.
• 4) Post-assembly checks and test drive/function verification
  • Check that the window moves smoothly, without stuttering or unusual noises.
  • Verify the correct closing of the window and its stability in the upper and lower positions.
  • Check that the glass does not go diagonally and does not bind in the seals or guide rails.
  • After reassembling the door, retest the function several cycles in a row.

  5) The most common assembly mistakes + how to avoid them

  • Swap part side – always check it is the left rear mechanism.
  • Insufficient comparison with the old piece – compare the mounting, guides and codes before assembly.
  • Damage to glass during work – glass must be securely secured before disassembly and assembly.
  • Assembly without checking the motor – if the original motor is being transferred, check its condition before reassembling the door.

  Reasons why the part is damaged

  • Mechanism wear from normal use
  • Damage or pulling of puller cables
  • Seizure of guide parts and increased resistance when moving the window
  • Intrusion of moisture and dirt into the door
  • Overloading with a frozen or stuttering window
  • Damage after improper disassembly or assembly
  • Defective motor that causes erratic operation or overloading of the mechanism