Description
ESP Switch for Citroën C4.
This ESP switch is a direct replacement designed for Citroën C4 vehicles and is commonly searched by OEM numbers 96476624XT and 454918. Ideal for professional workshops and DIY mechanics, the switch restores manual control of the vehicle stability/traction system indicator and allows the driver to enable or disable ESP/ASR functions as intended by the original equipment. The part is suitable for quick replacement during interior trim repairs or when the original switch shows signs of failure.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën C4
- Product Codes: 96476624XT
- Other Numbers: 454918
Features And Function
The switch provides the driver interface for the Electronic Stability Program (ESP) / Anti-Slip Regulation (ASR). It typically mounts in the instrument panel or center console and connects to the vehicle network (CAN) via a dedicated multi-pin connector. The switch controls the ESP system state and usually includes an indicator/illumination element to show the system status to the driver.
Compatibility And Fitment
Intended for Citroën C4 vehicles equipped with an ESP system. Fitment should be confirmed by matching the OEM product codes (96476624XT / 454918) and the physical connector/holder location. This part is often sought by technicians using the OEM numbers during diagnostics and parts sourcing.
Replacement Procedure
- Disconnect the vehicle battery before starting to prevent short circuits and avoid damage to electrical systems.
- Remove surrounding trim panels or bezel to access the switch (usually held by clips or small screws).
- Unclip or unscrew the switch from its mounting and carefully unplug the electrical connector.
- Install the replacement switch by connecting the electrical plug, secure the switch in the mounting, and reassemble trim pieces.
- Reconnect the battery and verify proper function: check illumination and ensure the ESP/ASR indicator behaves correctly during system checks.
Installation Recommendations
- Always disconnect the battery prior to removal/installation to protect vehicle electronics.
- Use appropriate trim tools to avoid damaging panels and clips.
- Inspect the connector and wiring for corrosion or damage before installing the new switch; repair any wiring faults to prevent repeat failure.
- After installation, perform a basic system check: confirm switch illumination, dashboard indicator status, and that no related fault codes remain.
Common Failure Causes
Typical reasons for switch failure include mechanical wear from frequent use, contamination or moisture ingress causing corroded contacts, broken mounting clips from forced removal, or internal illumination/LED failures. Electrical overloads or wiring faults in the vehicle can also damage the switch contacts. Replacing the switch often resolves driver-interface related ESP faults, but persistent system errors should be diagnosed further in the vehicle network and ESP control module.
Search Tags: 96476624XT, 454918, Citroën C4, ESP Switch, Traction Control Switch






