Description
Driver airbag for Citroën C2, C3 and C3 Pluriel. Color: FVD – Grey Chrome.
This steering wheel airbag is intended for Citroën small models and is commonly searched by product codes 96380009VD, 96380009ZE and 4112HH. The unit restores the frontal supplemental restraint system (SRS) functionality after deployment or damage, and retains the original steering wheel appearance thanks to the Grey Chrome finish. Suitable for professional workshops and experienced DIY mechanics who perform SRS repairs or steering wheel replacements.
Technical Information
- Manufacturer: Stellantis (Citroën)
- Model: Citroën C2; Citroën C3; Citroën C3 Pluriel
- Product Codes: 96380009VD, 96380009ZE
- Other Numbers: 4112HH, NFP
Function And Application
The steering wheel airbag module contains the driver-side inflator and frontal airbag cushion. In the event of a qualifying frontal impact the airbag inflates to reduce occupant forward movement and lessen the risk of head and chest injuries. The unit also integrates the horn pad and the SRS squib electrical connections that communicate with the vehicle airbag control unit (ACU).
Replacement Procedure (Overview)
Safety is critical when working with SRS components. General replacement steps used by professionals:
- Disconnect the negative battery terminal and wait at least 10 minutes to allow residual energy in the restraint system capacitors to dissipate.
- Remove the steering wheel trim or airbag retaining screws (manufacturer-specific fasteners such as Torx or bolts) and carefully lift the airbag module away from the wheel.
- Disconnect the airbag electrical connectors (squib connectors) using proper tooling and observe orientation and locking tabs to avoid damage.
- Fit the replacement airbag, reconnect the electrical connectors ensuring secure engagement, and reassemble the steering wheel components. Ensure the clock spring is centered and the steering wheel is aligned before tightening.
- Tighten steering wheel fasteners to the manufacturer’s torque specification and verify correct operation with a diagnostic scan tool. Clear SRS fault codes as required and confirm the SRS warning lamp extinguishes after cycling.
Installation Recommendations
- Work on the SRS only with the battery disconnected and follow vehicle manufacturer safety guidelines.
- Use a qualified diagnostic tool to read and clear SRS fault codes after fitting. If the SRS warning lamp remains on, re-check all connections and the clock spring alignment.
- Avoid touching the airbag face or inflator surface; handle the module by its housing. Store and transport modules with the trim/folded side facing upwards.
- Always replace any damaged connectors, wiring or clock spring assembly before installing a new airbag to prevent future faults.
Most Common Failure Causes
- Deployment In A Collision: Airbags are single-use devices and must be replaced after deployment.
- Electrical Faults: Damaged clock spring, corroded connectors or broken squib wiring can cause incomplete circuits and SRS warning lights.
- Physical Damage: Impact to the steering wheel, improper removal/installation or surface damage to the module can render it unusable.
- Aging And Contamination: Moisture ingress, oxidation of electrical contacts or contamination from spills can degrade connections and reliability.
Often searched by part numbers 96380009VD, 96380009ZE and 4112HH, this airbag is a direct-fit option for Citroën C2, C3 and C3 Pluriel steering wheels with the Grey Chrome finish. Proper installation and post-replacement diagnostic checks ensure restored SRS functionality and safe operation.
