Passenger Seat Airbag Peugeot 207 96546688ZD 8216NG

Notify when the product is in stock

36.00

Stellantis Citroën Peugeot
96546688ZD 8216NG

Out of stock

SKU: 2008-L13_K2a Categories: , , Tags: ,

Description

Right seat airbag for PEUGEOT 207
Colour HZD – BLACK MISTRAL
Front Passenger Seat

This replacement right-side passenger seat airbag is intended for Peugeot 207 vehicles. It is commonly searched by its part numbers and is suitable for professional workshops and experienced DIY mechanics who perform seat and SRS repairs. The unit restores occupant protection at the front passenger position after airbag deployment or when the original module is damaged.

Key Features

  • Direct Fit For Peugeot 207 Passenger Seat (Right Side)
  • Colour: Black Mistral (HZD) — matches original seat upholstery trims
  • Supplied As Seat Airbag Module For Front Passenger Seat
  • Commonly Identified By Part Numbers: 96546688ZD, 8216NG
  • Designed To Work With Vehicle SRS System; Requires Proper Diagnostics After Installation

Technical Information

  • Manufacturer: Stellantis / Peugeot
  • Model: Peugeot 207
  • Product Codes: 96546688ZD, 8216NG
  • Additional Numbers: 8216NG | 96546688ZD

Installation Recommendations

  • Always Disconnect The Battery Before Starting Work And Wait At Least 10 Minutes To Allow The SRS System To Discharge.
  • Move The Seat To Gain Access, Remove Seat Trim And Covers Carefully To Avoid Damaging Clips And Seat Fabric.
  • Unbolt The Airbag Module From The Seat Frame, Release The Electrical Connector By Releasing Its Locking Tab—Do Not Pull On Wires.
  • Install The New Module In The Correct Orientation, Secure Fasteners To Manufacturer Specifications, And Reconnect The Airbag Connector Properly.
  • After Mechanical Installation, Perform SRS Diagnostic Check With A Suitable Scanner, Clear Fault Codes And Confirm That The SRS Warning Light Operates Correctly.
  • Follow Manufacturer Procedures For Any Seat Occupancy Mat Or Sensor Reinitialization If REQUIRED.
  • If Unsure, Have Installation And Final SRS Coding/Reset Performed By A Qualified Technician With Appropriate Diagnostic Equipment.

Most Common Reasons For Failure

  • Airbag Deployment During Collision — Module Must Be Replaced After Deployment.
  • Connector Damage Or Corrosion Causing Intermittent Or Permanent Faults.
  • Physical Damage To Seat Structure Or Airbag Housing From Previous Repairs Or Impacts.
  • Wire Harness Damage From Seat Movement, Abrasion, Or Incorrect Previous Disassembly.
  • Water Ingress Or Long-Term Moisture Leading To Corrosion Of Contacts.

Note: Many customers search for this part using the OE numbers 96546688ZD and 8216NG. After replacement, always verify SRS system status with diagnostic equipment and ensure the vehicle shows no residual airbag fault codes before returning it to service.

Additional information

Weight 0.8 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.