Description
Right Front Seat Airbag For Peugeot 308 T7 Passenger Side
Product Overview
This genuine-style right front seat airbag is designed for the passenger side of the Peugeot 308 T7. It provides targeted lateral protection for the torso and pelvis in the event of a side impact, working together with curtain airbags and seatbelts to reduce injury risk. Ideal for professional garages and experienced DIY mechanics performing accident repairs or component replacements.
Key Benefits
- Direct Fit For Peugeot 308 T7 Models — Designed To Match Original Mounting Points And Connectors.
- Restores Passive Safety After Deployment Or Damage — Replaces Affected Seat Airbag Module To Recover Side-Impact Protection.
- OEM Part Numbers Included In Description For Easier Search And Verification (9656529380, 8216SF).
How The Part Functions
The seat airbag is an inflatable restraint built into the seat structure. During a qualifying side collision, crash sensors trigger the inflator to rapidly deploy the airbag, cushioning the passenger’s torso and reducing the risk of severe injury. The airbag module includes the inflator, cushion, mounting frame and electrical connector that communicates with the vehicle’s airbag control unit.
Replacement Procedure (Overview)
Replacement Should Be Performed By A Trained Technician Or An Experienced DIY Mechanic Comfortable With SRS Systems. General Steps:
- Disconnect The Negative Battery Terminal And Wait At Least 10 Minutes To Allow System Capacitors To Discharge.
- Move The Seat To Gain Access To The Mounting Screws And Trim Panels.
- Carefully Remove Seat Trim Panels To Expose The Airbag Module Fasteners.
- Unbolt The Airbag Module From The Seat Frame And Gently Disconnect The Airbag Connector (Observe Any Locking Tabs).
- Install The Replacement Module In Reverse Order, Ensuring Connectors Are Fully Seated And Fasteners Are Secured Following Manufacturer Guidance.
- Reconnect The Battery, Then Use A Diagnostic Tool To Verify Airbag System Status And Clear Any Fault Codes.
Installation Recommendations
- Always Disconnect The Battery Before Working On SRS Components And Observe A Safe Waiting Time (Commonly 10 Minutes) To Prevent Accidental Deployment.
- Handle The Airbag Module With Care — Do Not Place Face Down On A Hard Surface; Store With Inflator Facing Up If Temporarily Removed.
- Use The Correct Fasteners And Respect Manufacturer Instructions For Torque Values Where Specified.
- Verify System Integrity With A Diagnostic Scanner After Installation To Ensure No Residual Faults Remain.
Most Common Failure Reasons
- Deployment In A Collision — The Most Frequent Cause; Once Deployed The Module Must Be Replaced.
- Connector Or Wiring Damage — Abrasion, Corrosion Or Pin Damage Can Cause Faults And Airbag Warning Lights.
- Water Ingress Or Seat Moisture — Can Corrode Electrical Contacts And Lead To Intermittent Faults.
- Previous Improper Repairs — Incorrect Handling Or Poorly Performed Repairs Can Compromise Airbag Function.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 308 T7
- Product Codes: 9656529380, 8216SF
- Additional Numbers: 8216.SF
Notes For Professionals
This airbag module is intended as a direct replacement for damaged or deployed passenger-side seat airbags in compatible Peugeot 308 T7 vehicles. Always follow the vehicle manufacturer’s service manual for disassembly and reassembly procedures. After replacement, confirm the SRS system reports no faults and that the airbag warning lamp behaves normally.
