Description
Bulb Socket For The Right Rear Light Of PEUGEOT 207 3- And 5-Door Models. From 2010 With LED Lighting. Passenger Side.
Product Overview
This replacement bulb socket is designed for the right rear lamp of the Peugeot 207 (3‑door and 5‑door) from 2010 that are equipped with LED rear lighting. It secures the bulb or lamp insert in the lamp housing and provides the electrical contact necessary for proper operation. The part is commonly searched by its product codes and is intended for professional fitters and competent DIY mechanics who maintain or repair Peugeot lighting assemblies.
Features And Benefits
- Direct Fit For Right Rear Lamp On Passenger Side.
- Compatible With LED-Equipped Rear Light Assemblies (From 2010 Models).
- Robust Contact Points To Ensure Reliable Electrical Connection.
- Helps Prevent Intermittent Contact And Flicker When Installed Correctly.
- Often Searched By Product Codes For Fast Identification.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 207 (3-Door And 5-Door), Passenger Side, Right Rear Lamp
- Product Codes: 9686565980, 6351HQ
- Other Numbers: 6351HQ | 9686565980
Fitment And Compatibility
This socket fits Peugeot 207 models (3 and 5 doors) from 2010 equipped with LED rear lighting, for the right rear lamp on the passenger side. Customers frequently search using the OEM numbers 9686565980 and 6351HQ to find the correct part quickly.
Replacement Procedure
Intended For Experienced Mechanics And Confident DIY Users. Typical replacement steps:
- Park The Vehicle On A Level Surface And Switch Off Ignition.
- Disconnect The Negative Battery Terminal If You Prefer Additional Safety.
- Open The Tailgate/Boot And Remove Any Interior Trim Or Fasteners Blocking Access To The Taillight Assembly.
- Unscrew Or Release The Taillight Fasteners, Carefully Pull The Lamp Assembly Outwards To Access The Socket.
- Release The Old Socket From The Lamp Housing, Unplug The Electrical Connector And Remove Any Retained Bulb.
- Install The New Socket In Reverse Order, Ensure Correct Orientation And Secure Retention Clips/Screws.
- Reconnect The Electrical Connector, Refit The Lamp Assembly And Interior Trim, Then Test All Rear Light Functions (Brake, Tail, Indicator, Reverse As Applicable).
Recommendations For Installation
- Use Contact Cleaner To Remove Corrosion From Connectors Before Fitting The New Socket.
- Apply A Thin Layer Of Dielectric Grease On Metal Contacts To Reduce Future Corrosion And Improve Longevity.
- Avoid Excessive Force When Seating The Socket; Ensure Clips And Seals Are Intact To Prevent Water Ingress.
- Check Lamp Housing Seals And Replace Damaged Gaskets To Prevent Moisture-Related Failures.
- After Reassembly, Verify Functionality Of All Rear Lights On A Test Drive Or With Assistance.
Why This Part Commonly Fails
- Corrosion Of Electrical Contacts Due To Moisture Or Damaged Seals Leading To Intermittent Or Failed Contact.
- Wear From Repeated Bulb Changes Causing Loose Fit Or Broken Retention Tabs.
- Heat Cycling Around The Lamp Area Gradually Degrading Plastic And Contacts.
- Mechanical Damage From Impacts Or Improper Removal/Installation Of The Taillight Assembly.
Notes
Do not assume universal interchangeability. Use The Provided Product Codes (9686565980, 6351HQ) To Confirm Correct Fitment For The Specific Peugeot 207 Variant. Proper preparation, cleaning Of Contacts, And Attention To Seals Will Significantly Extend The Service Life Of The Replacement Socket.
