Right Rear Side Airbag Peugeot 407 9647923680 8216CP

24.00

Stellantis Citroën Peugeot
9647923680 8216CP NFP

3 in stock

SKU: 3933-B16_K2 Categories: , , Tags: ,

Description

Right Rear Side Airbag for PEUGEOT 407

This genuine PSA Group airbag (Stellantis Citroen Peugeot) with part numbers 9647923680 / 8216CP is designed as a direct-fit safety replacement for the right rear side position of Peugeot 407 vehicles. Designed for professional workshops and experienced DIYers, this unit restores side-impact protection after deployment or damage. The listing emphasizes OEM references so mechanics who search by part number can quickly identify the correct component.

Key Features

Direct-fit replacement for the Right Rear Side position. Ideal for repair shops and independent mechanics who require the correct part numbers for ordering and vehicle repairs. Restores occupant protection in lateral collisions and resets the vehicle airbag system once properly installed and coded (if required).

Technical Information

  • Manufacturer: Stellantis Citroen Peugeot
  • Model: Peugeot 407
  • Product Codes: 9647923680, 8216CP
  • Other Numbers: NFP

Compatibility / Fitment

Fits Peugeot 407 right rear side airbag locations. Commonly used on 407 saloon and estate (SW) body styles produced in the mid-2000s. Verify physical fitment and connector shape against the removed unit or parts diagram before installation.

Function And Service Notes

The right rear side airbag is part of the vehicle Supplemental Restraint System (SRS). In a side impact event the airbag deploys to reduce risk of injury to rear seat occupants by cushioning and limiting lateral movement. Airbags are single-use safety devices: once deployed they must be replaced. The module contains the inflation device, airbag cushion and electrical connector that interfaces with the vehicle SRS wiring and sensors.

Common Failure Causes

  • Deployment After Collision: Primary cause. Any airbag that has deployed must be replaced.
  • Water Ingress Or Corrosion: Moisture in seat or body cavities can corrode connectors or trigger faults.
  • Damage During Previous Repairs: Incorrect removal or damaged wiring/connectors can produce SRS faults.
  • Connector Or Wiring Faults: Broken pins, chafed wires, or poor grounding causing open or short circuits.
  • Sensor Or Control Unit Faults: Faults elsewhere in the SRS can make an airbag appear faulty even if the unit itself is intact.

Replacement Interval

There is no routine replacement interval for airbags. Replace the airbag if it has deployed, if the unit or its connector is damaged, or if the vehicle diagnostic system indicates a fault specific to the right rear side airbag. After replacement, clear SRS fault codes and confirm system readiness with a diagnostic tool.

Installation Recommendations

  • Always Disconnect The Battery: Before starting work, disconnect the negative battery terminal and wait at least 10 minutes to allow SRS energy capacitors to discharge.
  • Follow Manufacturer Procedures: Remove trim panels and seat components carefully to avoid damaging the airbag or wiring.
  • Handle Airbag Modules With Care: Store with the airbag cushion facing upward and avoid impact or exposure to heat.
  • Use Correct Fasteners And Torque: Refit using the original fasteners and tighten to the Manufacturer Recommended Torque.
  • Clear And Verify SRS Codes: After installation, use an appropriate diagnostic tool to clear faults and perform system checks. If an SRS warning remains, troubleshoot wiring, connectors and related sensors.
  • Professional Installation Recommended: For safety-critical systems such as airbags, installation by a trained technician is strongly advised.

How The Part Is Replaced (Summary)

  1. Disconnect Battery And Wait To Ensure SRS Is De-energized.
  2. Remove Interior Trim Or Seat Components To Access The Right Rear Side Airbag.
  3. Disconnect The Airbag Electrical Connector And Unbolt The Module.
  4. Install The Replacement Unit, Reconnect The Connector And Secure All Fasteners To Spec.
  5. Reconnect Battery, Clear SRS Fault Codes And Confirm Airbag System Status With A Diagnostic Tool.

Why Choose This Part

Using the correct part number (9647923680 / 8216CP) ensures proper fit and function, which is essential for occupant safety. This airbag helps repair collision-damaged vehicles to restore original protection levels. Clear part-number listing makes procurement faster for professional buyers and experienced DIY mechanics.

Additional information

Weight 1.2 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.