Description
Electric central locking actuator for the left front door for Peugeot 206 and 206+. Driver’s door.
Upgrade or replace the left front door lock/actuator for the Peugeot 206/206+ to restore reliable central locking and door latching. This direct-fit electric latch assembly (driver’s side) is designed to work with the car’s central locking system and secures the door with a mechanical latch driven by a small electric motor and linkages. Ideal for professional technicians and DIY mechanics who need a fast, dependable repair—often searched under part number 9135R9.
Key Benefits
- Direct replacement for the left front door of Peugeot 206 and 206+—no major modifications required.
- Restores central locking function and improves door closing security.
- Compact, serviceable design—easy access to electrical connector and mounting points.
- Compatible with common central locking systems used on Stellantis small cars.
How It Works
The unit combines a mechanical latch and an electric actuator motor. When the central locking system sends a lock/unlock command, the actuator moves internal gears and levers to engage or release the latch. The assembly also contains the door latch mechanism that physically secures the door striker.
Typical Faults And Why They Occur
- Worn Or Stripped Plastic Gears: Repeated cycling can degrade internal gears, causing incomplete locking or failure to operate.
- Water Ingress And Corrosion: Moisture entering the mechanism leads to corrosion, increased friction, and electrical shorts.
- Motor Wear Or Electrical Failure: The small actuator motor can fail electrically after many cycles or due to poor connector contact.
- Mechanical Wear On Latch Components: Springs and pawls can fatigue, causing sticking or intermittent operation.
Replacement And Installation
General replacement steps (recommended for experienced mechanics or skilled DIYers):
- Disconnect The Battery And Wait A Few Minutes To Prevent Short Circuits And Avoid Airbag System Issues.
- Remove The Interior Door Trim Panel Carefully To Access The Lock Assembly (Retain Clips And Fasteners).
- Peel Back The Water/Vapor Barrier To Expose The Lock And Linkages.
- Disconnect The Electrical Connector And Any Linkage Rods Attached To The Lock.
- Remove The Mounting Screws/Bolts That Secure The Lock To The Door And Withdraw The Unit.
- Fit The New Lock, Reattach Linkages And Connector, Reinstall The Vapor Barrier And Door Trim, Then Reconnect The Battery.
- Test Locking, Unlocking, And Manual Operation Several Times To Confirm Correct Function.
Follow Manufacturer Procedures Where Available And Use Proper Trim Tools To Avoid Damage. If The Electrical Connector Shows Corrosion, Clean Contacts Before Reassembly.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Peugeot 206; Peugeot 206+
- Product Codes: 9135R9
- Additional Numbers: 9135.R9
Installation Recommendations
Work In A Dry Area To Reduce The Risk Of Moisture Entering The New Unit. Replace Any Damaged Linkage Clips Or Fasteners During Installation. After Fitting, Lubricate Moving Parts Lightly With A Suitable Corrosion-Inhibiting Grease And Check That The Door Striker Is Aligned For Smooth Engagement.
Why This Part Is Often Replaced
Door locks on older Peugeot 206 models commonly fail due to a combination of mechanical wear and exposure to moisture. Frequent use, accumulation of dirt, and compromised seals allow water and debris to reach internal gears and the actuator motor, shortening service life. Replacing the faulty lock restores reliable central locking, prevents door ajar warnings, and eliminates intermittent locking problems.
Order this left front door lock by part number 9135R9 for a straightforward repair that gets the Peugeot 206/206+ back to secure, quiet operation.
