Description
Driver Seat Belt For PEUGEOT 308 T7. Color FXX – BLACK
This Driver Seat Belt is a direct-fit safety component for the Peugeot 308 (T7) range. Ideal for professional garages and experienced DIY mechanics, the belt assembly is referenced under product codes 96768383XX and 8976S1 and is supplied in Black (Color Code FXX). The assembly includes the retractor and buckle interface and is designed to restore occupant restraint performance after wear, damage, or accidental deployment.
Features And Benefits
– Direct Replacement For Driver Side: Manufactured to match original mounting points and connector types for easy installation on compatible Peugeot 308 (T7) vehicles.
– Integrated Retractor And Pretensioner Interface: Works with the vehicle’s safety systems to lock webbing during a sudden stop and to support pretensioner activation if equipped.
– OEM Reference Numbers Included: Commonly Searched By Part Numbers 96768383XX And 8976S1 — useful For Fast Identification And Ordering.
Compatibility
Peugeot 308 (T7) — Driver Side. Color: Black (FXX). Cross-reference With Product Codes 96768383XX / 8976S1.
How To Replace
1. Prepare Vehicle: Park on level ground, engage parking brake and, before working near the pretensioner connector, disconnect the negative battery terminal and wait a few minutes to eliminate residual charge.
2. Remove Interior Trim: Carefully remove covers and trim panels around the B-pillar and seat base to access mounting bolts and electrical connectors.
3. Unbolt Anchors: Loosen and remove lower anchor bolts and the retractor mounting bolt(s). Keep bolts for reuse only if in good condition and per manufacturer guidance.
4. Disconnect Electrical Connector: If The Belt Assembly Has A Pretensioner Connector, Disconnect It Carefully To Avoid Damage.
5. Fit New Unit: Install New Belt Assembly Ensuring Webbing Is Not Twisted. Reconnect Electrical Connector And Refit Fasteners.
6. Torque And Check: Tighten All Fasteners To The Manufacturer’s Torque Specifications Using A Torque Wrench. Verify Smooth Retractor Operation, Proper Buckle Engagement And That The Webbing Runs Freely.
7. Reconnect Battery And Perform System Checks As Per Vehicle Procedure.
Installation Recommendations
– Always Follow Manufacturer Service Manual For Fastener Torque Values And Step-By-Step Procedures.
– Disconnect The Battery Before Handling Any Pretensioner Wiring To Prevent Accidental Deployment.
– Use A Torque Wrench For All Safety-Related Fasteners And Replace Any Damaged Bolts Or Clips.
– Ensure Electrical Connector Is Fully Seated And Wiring Is Free From Pinch Points.
– After Installation, Confirm Seat Belt Warning Lamp And Restraint System Diagnostic Status Using Suitable Diagnostic Equipment.
Why Seat Belts Fail
– Deployment In A Crash: Pretensioners Activate During A Collision; After Activation The Entire Assembly Must Be Replaced.
– Wear And Abrasion: Repeated Use, Sharp Edges Or Foreign Debris Can Fray Webbing Leading To Loss Of Strength.
– Retractor Seizure: Dirt, Corrosion Or Internal Mechanism Wear Can Cause The Retractor To Stick Or Fail To Lock Properly.
– Electrical Connector Issues: Corrosion Or Poor Connection Can Affect Pretensioner Functionality.
– Fastener Or Anchor Corrosion: Compromised Mounting Points Reduce The Effectiveness Of The Restraint System.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Peugeot 308 (T7) — Driver Side
- Product Codes: 96768383XX, 8976S1
- Additional Numbers: FXX (Color Code – Black)
