Description
Right Front Window Regulator Motor For CITROËN C8 And PEUGEOT 807
Electrically Folding Mirror
Passenger Side
Reliable replacement right front power window motor designed for Citroën C8 and Peugeot 807. This motor restores smooth, dependable operation to the passenger-side window and is commonly searched by part numbers 1488737080, 1400208580 and 9222V3. Ideal for professional workshops and DIY mechanics who need a direct-fit unit to eliminate slow, noisy or non-functioning windows.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C8; Peugeot 807
- Product Codes: 1488737080, 1400208580, 9222V3
- Additional Numbers: 1400208580 | 1488737080 | 9222V3
Function And Features
This 12V electric window regulator motor drives the passenger-side regulator mechanism to raise and lower the front right window. It converts rotational torque from the motor into linear motion via the regulator gears or cable system, ensuring controlled window movement. Designed for OEM fitment on the specified MPV models and optimized for frequent use.
Compatibility
Direct fit for Citroën C8 and Peugeot 807 passenger-side front window regulator assemblies. Customers often locate this part by the listed product codes—use these numbers when searching or ordering to ensure correct match.
Installation Recommendations
- Safety First: Disconnect the vehicle battery before starting work to avoid short circuits or accidental operation.
- Door Trim Removal: Carefully remove interior door trim and protective moisture barrier to access regulator and motor. Use plastic trim tools to avoid damaging clips and panels.
- Electrical Disconnection: Unplug the motor connector and note connector orientation for reassembly.
- Motor Removal: Unbolt the motor from the regulator assembly. Support the glass while detaching to prevent drop or misalignment.
- Preparation: Clean and inspect regulator tracks, cables and guide rollers. Lubricate sliding surfaces with appropriate grease before fitting the new motor.
- Testing: Temporarily reconnect the battery and test window operation before reassembling the door trim to confirm correct function and travel limits.
- Reassembly: Refit moisture barrier and door trim, ensuring all clips and fasteners are correctly seated.
Why This Part Commonly Fails
- Wear And Tear: Internal motor brushes, gears or bearings wear over time from repeated use, reducing torque and causing failure.
- Water Ingress And Corrosion: Moisture entering the door cavity can corrode motor terminals and internal components, leading to intermittent operation or seizure.
- Regulator Binding: Misaligned glass, damaged guides or debris in the track increase load on the motor, accelerating gear and motor wear.
- Electrical Issues: Poor connector contact or voltage drops (fuses, switches) can mimic motor failure; always verify power supply before replacing the unit.
Symptoms Of A Faulty Motor
- Window Moves Slowly Or Intermittently
- Grinding Or Clicking Noises During Operation
- Window Fails To Move Or Is Stuck In One Position
- Operation Works Only With Assistance Or At Certain Positions
Maintenance Tips
- Keep Window Tracks Clean: Remove dirt and old grease; lubricate with a suitable silicone or lithium-based grease to reduce load on the motor.
- Check Drainage: Ensure door drain holes are clear to prevent water accumulation and corrosion.
- Inspect Regulator Components: Replace worn cables, guide rollers or sliders to prevent premature motor failure.
Tools And Time Estimate
Typical tools: Screwdrivers, Torx/Hex/Socket set, trim removal tools, grease. Estimated time: 30–90 minutes depending on experience and whether the regulator requires additional repairs.
Replace a failing right front window regulator motor with this part to restore quiet, reliable window operation on Citroën C8 and Peugeot 807. Use the product codes for quick identification and ordering.
