Antenna complete Citroën Xsara Picasso 9658881880 6561A0 6561EF 6561A1

Description

Complete antenna and cable for CITROEN XSARA PICASSO cars

Part description

This complete car antenna is designed for Citroën Xsara Picasso cars and comes with a cable, making it easy to replace the original damaged or non-functional part. It is a used car part suitable for repairs when it is necessary to restore radio reception and return the car’s electrical equipment to working order.

When searching, this part is often searched for by production numbers, so it is also suitable for mechanics and DIYers who compare the markings with their original part. Thanks to the complete design with cable, replacement can be more practical than finding individual parts separately.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Citroën Xsara Picasso
• Other numbers: 9658881880, 6561A0, 6561EF, 6561A1

Product codes

• Product codes: 9658881880, 6561A0, 6561EF, 6561A1
• Models: Citroën Xsara Picasso

Installation recommendations

Generally/typically for this type of part, the exact procedure for replacing the antenna may vary depending on the specific design of the car and the type of attachment. Below is a safe general procedure for replacing the complete antenna with cable.

1) Before assembly

• Check the condition of the used part and compare it with the old antenna.
• Verify the compatibility of connectors, cable length and routing, mounting type and part designation.
• Check whether there is damage to the cable, end caps, threads, antenna foot or insulating parts.
• Before starting work, we recommend disconnecting the battery, especially if you are going to interfere with the vehicle’s electrical installation.

2) Necessary tools and materials

• Basic set of hand tools
• Tools for removing interior linings
• Contact cleaner and cloth
• Work lighting
• Possibly protective gloves

3) Step-by-step assembly procedure

1. Turn off the ignition and secure the vehicle against movement.
2. Disconnect the battery if the nature of the intervention in the wiring requires it.
3. Remove interior trim or parts that prevent access to antenna cable routing and antenna mounting.
4. Disconnect the original antenna cable from the downstream installation or radio according to the access in the vehicle.
5. Unfasten the old antenna and remove it carefully so as not to damage the surrounding parts or wiring.
6. Compare the old and the new part – especially the shape of the foot, mounting, connector and cable routing.
7. Clean the bearing surfaces and contact points from dirt, oxidation and residues of old deposits.
8. Place the used antenna in place and route the cable in a similar way to the original part to avoid pinching or chafing.
9. Connect the cable to the connector and check that the connection holds properly and without play.
10. Fix the antenna and check its stability without excessive stress on the foot or cable.
11. Reinstall the removed covers, trim and other access parts.
12. Connect the battery and perform a basic function check.

• 4) Post-assembly checks and test drive/function verification

  • Verify radio reception and signal stability during normal operation.
  • Check if the signal drops out when the vehicle is moving or when handling the wiring.
  • Check that nothing resonates, knocks and the cable is not loosely stored.
  • After a short ride, recheck the fastening and the condition of the accessible parts of the assembly.

  5) The most common assembly mistakes + how to avoid them

  • Part exchange based on appearance – always compare product numbers and connectors as well.
  • Damage to the cable during routing – do not forcefully bend the cable or run it over sharp edges.
  • Insufficient tightening or seating – after installation, check the strength of the antenna attachment.
  • Fouled contacts – clean the connectors and check their condition before connecting.

  Reasons why the part is damaged

  • mechanical damage to the antenna during car washing, parking or impact
  • wear and aging of the material due to weather and UV radiation
  • corrosion of contacts and deterioration of the conductivity of connections
  • damage to the cable by bending, pinching or improper handling
  • release of attachment and subsequent deterioration of signal reception