Description
Heater Fan VALEO For Citroën C1 And Peugeot 107 — For Vehicles Without Air Conditioning
Product Overview
This Valeo heater fan (blower motor) is designed as a direct-fit replacement for the ventilation system in Citroën C1 and Peugeot 107 models without factory air conditioning. The unit restores cabin airflow, ensures reliable cabin heating and defogging, and meets the build quality expected by professional mechanics and experienced DIYers. Typical search terms: Valeo heater fan, blower motor, Citroën C1 fan, Peugeot 107 blower, part number 6441V1.
Compatibility
Suitable For: Citroën C1, Peugeot 107 (For Vehicles Without Air Conditioning). Check the product codes below to verify fitment with the vehicle’s existing part number.
How It Works And Why It Fails
The heater fan circulates air through the heater core and into the passenger compartment. It consists of an electric motor with an attached impeller and an electrical connector for speed control. Common failure modes are worn motor brushes, seized bearings, debris build-up in the impeller, or electrical faults such as connector corrosion or a failed speed resistor. Symptoms of a failing unit include reduced or intermittent airflow, unusual noise (rattling or grinding), and complete loss of blower function.
Typical Replacement Procedure
- Disconnect The Battery Before Starting Work.
- Access The Blower Motor From The Passenger Side Under-Dash Area; In Many Cases Removal Of The Glovebox Or Lower Dash Trim Is Required.
- Unplug The Electrical Connector And Remove Mounting Screws/Clips Holding The Fan Assembly.
- Withdraw The Old Unit Carefully (Watch For Debris) And Compare Connectors/Flange Orientation With The New Part.
- Fit The Replacement Unit, Reconnect Electrical Connector, Reinstall Trim/Glovebox And Reconnect The Battery.
- Test All Fan Speeds And Check For Unusual Noise Or Vibration Before Final Assembly.
Technical Information
- Manufacturer: Valeo
- Model: Heater Fan / Blower Motor
- Product Codes: 6441V1, 6450SN, N101813C
- Other Numbers: Listed Cross References: 6441V1 | 6450SN | N101813C
Installation Recommendations
Perform The Replacement In A Clean Environment To Prevent Debris Entering The HVAC System. Use Proper Tools And Torque Settings For Fasteners. Inspect The Electrical Connector For Corrosion And The Air Ducts For Blockages While The Unit Is Removed. If The Vehicle Has Multiple Fan Speeds Controlled Via A Resistor Module, Inspect Or Replace The Resistor If Speed Control Is Unreliable. After Installation, Verify All Fan Speeds And Confirm Effective Heating/Defogging.
Most Common Failure Causes
- Wear Of Motor Brushes And Bearings Causing Noise Or Seizure.
- Accumulation Of Leaves, Dust Or Debris In The Impeller Causing Imbalance.
- Electrical Issues: Connector Corrosion, Broken Wires Or Failed Speed Resistor.
- Overheating Or Restricted Airflow Leading To Premature Motor Failure.
This Valeo heater fan is a practical, cost-effective replacement part for restoring proper cabin ventilation in Citroën C1 and Peugeot 107 vehicles without air conditioning. Designed for easy fitment and reliable operation, it is suitable for professional workshops as well as competent DIY repairs.
