Description
Left Exterior Mirror For CITROËN C4 PICASSO And GRAND PICASSO
Electrically Adjustable, Heated, Puddle Light
Driver Side, 14 Pins 6+5+3
Color EXY – Paint Black Onyx
Other Colors Available
Product Summary
High-quality left exterior mirror designed for Citroën C4 Picasso and Grand Picasso models. This electrically controlled, heated mirror includes an integrated puddle/approach light and a 14‑pin connector arranged as 6+5+3. Finished in EXY Black Onyx paint, it is a direct-fit replacement for damaged or faulty driver-side mirrors. Commonly searched by OE numbers 96851519XY, 8153VS and 8153H6, this unit is suitable for professional workshops and DIY car owners who require a reliable and complete mirror assembly.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C4 Picasso, Citroën Grand Picasso
- Product Codes: 96851519XY, 8153VS, 8153H6
- Additional Numbers: EXY / EXYB (Paint Code Black Onyx), 14‑Pin Connector (6+5+3)
Functions And Features
- Electric Adjustment: Multi‑directional motor for mirror glass positioning.
- Heating Element: Integrated demist/heater to clear condensation and ice.
- Puddle/Approach Light: Illuminates ground beside the door for safety and convenience.
- Fold Mechanism: Manual or electric folding depending on vehicle equipment (verify connector functions).
- Connector: 14 pins grouped as 6+5+3 – supports motors, heater, lighting and any additional sensors fitted to the original assembly.
Replacement Procedure
Recommended Steps For Removal And Installation:
- Park Vehicle On Level Surface And Engage Parking Brake. Disconnect The Battery Before Starting Work To Avoid Short Circuits And Airbag/System Faults.
- Remove Interior Door Trim Or Mirror Cover To Access Mirror Mounting Bolts And Electrical Connector. Carefully Pry Off Trim Using Appropriate Trim Tools To Avoid Damage.
- Disconnect The 14‑Pin Connector By Releasing Any Locking Tabs. Note Connector Orientation For Reinstallation.
- Unscrew The Mounting Bolts Securing The Mirror To The Door And Carefully Remove The Mirror Assembly From The Door.
- Fit The New Mirror Assembly Into Position, Secure Mounting Bolts To Manufacturer Torque Specs, And Reconnect The 14‑Pin Connector.
- Reassemble Door Trim Or Mirror Cover. Reconnect The Battery And Test All Functions: Adjustment, Heating, Folding And Puddle Light.
When Replacing The Mirror, Verify That The New Unit Matches The Original Connector Layout And Functions (Heater, Puddle Light, Folding Motor). If Any Functions Do Not Operate, Recheck Connector Pins And Wiring For Damage Or Corrosion.
Installation Recommendations
- Always Disconnect The Battery Before Starting Work To Prevent Electrical Damage.
- Use Proper Trim Removal Tools To Avoid Breaking Clips Or Interior Panels.
- Tighten Mounting Bolts To The Vehicle Manufacturer’s Specified Torque.
- After Installation, Check Mirror Adjustment Range, Heating Operation, Folding Mechanism And Puddle Light Functionality.
- If Electrical Functions Fail, Inspect The Connector For Bent Pins, Corrosion Or Water Ingress And Repair Wiring Harnesses As Needed.
Why This Part Fails Most Often
Exterior mirrors typically fail due to impact damage (parking knocks, collisions) or progressive electrical/water ingress issues. Common failure modes include broken mirror housing or glass after impact, motor failure for adjustment, heater element burnout, corroded connector pins causing intermittent or total loss of function, and damaged wiring at the folding pivot. The puddle light and internal wiring are also susceptible to moisture penetration, especially around seals and grommets.
Notes For Mechanics And DIYers
This mirror is a complete assembly intended for direct replacement. It’s often located by OE numbers 96851519XY, 8153VS and 8153H6, so adding these codes to search queries speeds up finding the correct unit. Because door mirrors are exposed components, check surrounding wiring and seals when fitting the new assembly to avoid repeat failures.
