Description
Speaker (tweeter) for various models of Citroën and Peugeot vehicles. HARMAN, ASK or other manufacturers.
This OEM-style tweeter is a direct-fit audio replacement for a wide range of Citroën and Peugeot models, offered under part numbers 9633355780 and 6562C7. Designed for Automechanics and DIY Enthusiasts, the speaker restores clarity in the upper-frequency band, improves vocal and instrument detail, and integrates with factory audio systems without complex modifications. Suitable for replacements during stereo upgrades, water-damage repairs, or after impact to interior trim when the original tweeter is damaged.
Fitment And Compatible Models
Compatible With Citroën And Peugeot Models Including: Citroën C4 Picasso, Citroën C5, Citroën C8, Citroën Xsara Picasso; Peugeot 206+, Peugeot 207, Peugeot 3008 I, Peugeot 307, Peugeot 308, Peugeot 308 T9, Peugeot 407, Peugeot 5008 I, Peugeot 807. Often Searched By Part Numbers: 9633355780, 6562C7.
Function
The Tweeter Reproduces High Frequencies (Treble) Within The Car Audio Spectrum, Delivering Crisp High-End Detail And Improved Soundstage. In Factory Systems It Works Together With Midrange Drivers And Woofer Or Subwoofer Crossovers To Maintain Balanced Frequency Response.
Replacement Procedure
Typical Replacement Steps For Mechanics And Experienced DIYers:
- Disconnect The Battery To Avoid Short Circuits And Protect Vehicle Electronics.
- Remove Relevant Interior Trim Or Speaker Grille Carefully Using Trim Tools To Avoid Damage.
- Unscrew Or Unclip The Old Tweeter, Unplug The Electrical Connector Or Soldered Leads.
- Install The New Tweeter, Ensuring Correct Polarity And Secure Mounting; Reuse OEM Fasteners Where Possible.
- Reconnect The Battery And Test The Speaker At Low Volume Before Final Reassembly.
Technical Information
Manufacturer: HARMAN / ASK / Other Manufacturers
Model: Tweeter For Citroën And Peugeot Factory Audio Systems
Product Codes: 9633355780, 6562C7
Other Numbers: 6562C7, 9633355780
Installation Recommendations
Use Proper Trim Removal Tools To Prevent Breakage Of Clips And Panels. Verify Connector Fitment—OEM Connectors Allow Plug-And-Play Installation; If Adapter Is Required, Solder Or Crimp Connections Securely And Insulate Properly. Observe Polarity Markings To Maintain Correct Phase. Avoid Over-Tightening Screws That Could Deform The Mounting Frame Or Transmit Vibrations. After Installation, Run A Short Audio Check At Low Volume To Confirm Operation Before Final Reassembly.
Why The Part Most Commonly Fails
Common Failure Causes Include Water Ingress From Door Leaks Or Faulty Seals, Long-Term Exposure To Humidity And Heat Leading To Diaphragm Or Voice-Coil Damage, Mechanical Impact During Interior Work, And Faults Originating From The Amplifier Or Head Unit (Overdrive Or DC Offset). Corrosion Of Contacts Or Connector Pins Can Also Cause Intermittent Operation Or Complete Failure.
Notes For Professionals
When Replacing Tweeters In Vehicles With Factory Amplification Or Active Crossovers, Verify That The Replacement Unit Matches Intended Impedance And Power Handling Of The System To Avoid Mismatch And Potential Damage. Keep Factory Fasteners And Clips For Proper Reinstallation.
Keywords: Citroën Tweeter, Peugeot Tweeter, 9633355780, 6562C7, Car Audio Replacement, OEM Tweeter, Speaker For Citroën, Speaker For Peugeot.
