Description
Tool kit: jack, wheel wrench, towing eye, with body-mounted holder. Suitable for vehicles Citroën C3 Picasso, C4 and C4 II B7, Peugeot 207, 308, 301.
Product Overview
This compact tool kit contains the essentials every Citroën and Peugeot owner or professional mechanic needs for emergency wheel changes and light recovery: a scissor jack, a wheel nut wrench, a reinforced towing eye and a steel holder that mounts to the body for secure storage. The set is designed to fit factory mounting points and spare wheel wells on the listed models, offering original-equipment fitment and convenient stowage.
Key Benefits
- Complete Set: All necessary tools for changing a wheel or using a tow point in one kit.
- Vehicle-Specific Fitment: Designed to match mounting and storage locations on Citroën C3 Picasso, C4, C4 II B7 and Peugeot 207, 301, 308.
- Durable Construction: Steel towing eye and holder with a robust scissor jack for safe lifting of the vehicle at designated jacking points.
- Space-Saving Design: Holder secures the kit to the body to prevent rattling and to keep the boot organized.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C3 Picasso; Citroën C4; Citroën C4 II B7; Peugeot 207; Peugeot 301; Peugeot 308
- Product Codes: 673695, 672594, 671739
- Additional Numbers: 671739 | 672594 | 673695
How To Use / Replace
This is a vehicle accessory rather than a permanently fitted component. Typical use and replacement steps:
- Access: Open the boot and remove the cover or spare wheel to reach the body-mounted holder.
- Release: Unclip or unscrew the holder fastener to retrieve the jack, wrench and towing eye.
- Wheel Change: Loosen wheel nuts slightly with the wrench before lifting. Position the jack under the manufacturer-recommended jacking point (consult the vehicle owner’s manual for exact locations) and lift the vehicle until the wheel is off the ground. Fully remove the wheel nuts and wheel, replace the wheel, tighten nuts by hand, lower the vehicle and torque nuts to the correct specification.
- Towing Eye: Screw the towing eye into the dedicated threaded socket (usually located behind a small cover on the front or rear bumper) until fully seated before applying any towing force.
Installation Recommendations
- Inspect Mounting: Ensure the holder is securely fastened to the body mounting points to prevent movement and noise.
- Follow The Manual: Always use the jacking points specified in the vehicle owner’s manual to avoid structural damage.
- Safety First: Park on level ground, apply the handbrake, chock opposite wheels, and never place any part of your body under a vehicle supported only by a jack.
- Maintenance: Clean and lightly lubricate the jack screw threads periodically to keep the mechanism operating smoothly.
Why This Part Fails Most Often
Tool kits themselves rarely ‘fail’ mechanically, but problems commonly encountered are:
- Corrosion: Prolonged exposure to moisture and road salt can corrode the jack screw, wrench or towing eye threads, making them difficult to operate or unsafe.
- Damage Or Deformation: Incorrect use (e.g., using the jack at the wrong point or overloading) can bend or damage the jack or holder.
- Loss Or Missing Parts: Tools secured by clips or fasteners in the boot can become loose and be misplaced during servicing or after tire changes.
Notes For Professionals And DIYers
Mechanics and competent DIYers will appreciate the OE-fit nature of this kit for rapid replacement during service. When fitting the holder, ensure fasteners are torqued to the vehicle manufacturer’s specification and check that the towing eye threads engage fully before use.
Search Tips
Customers often search using product codes. Use codes 673695, 672594 or 671739 when looking for this specific kit for Citroën and Peugeot models.
