Description
Left rear lamp, light for Citroën C1 second generation. Driver’s side.
Replace a worn or damaged left rear lamp with this direct-fit assembly designed for Citroën C1 second-generation vehicles. This OE-equivalent rear combination lamp improves safety and legal compliance by restoring correct tail, brake and turn signal visibility. The unit is identifiable by part numbers 81560-0H152 and B001031980, which are commonly used by mechanics and DIYers when searching for a compatible replacement. Robust housing and correct mounting points make installation straightforward for a trained technician or an experienced home mechanic.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C1 (Second Generation)
- Product Codes: 81560-0H152, B001031980
- Additional Numbers: 81560-0H152 | B001031980
Compatibility And Fitment
Fits Left Rear Position On Citroën C1 Second-Generation Models. Confirm Fitment By Matching The Part Number On The Existing Lamp. The Lamp Is Supplied As A Complete Assembly To Replace A Damaged Or Non-Functional Rear Unit.
Function
Rear Combination Lamp Provides Tail Light, Brake Light And Turn Signal Functions (Depending On Vehicle Equipment). Restoring The Correct Optical Output Ensures Visibility To Other Road Users And Compliance With Road Regulations.
Replacement Procedure
General Steps For Replacement: Open The Tailgate And Remove The Inner Trim Panel To Access The Mounting Screws. Remove The Retaining Screws Or Nuts Securing The Lamp, Carefully Disconnect The Wiring Connector And Any Bulb Holders. Remove The Old Lamp Assembly, Insert The New Unit, Reconnect The Wiring And Secure The Mounting Fasteners. Test All Light Functions Before Refitting The Trim Panel.
Installation Recommendations
- Work With Ignition Off And Lights Switched Off. Protect Surfaces And Use Appropriate Trim Tools When Removing Interior Panels.
- If Bulbs Are Replaceable, Transfer Or Replace Bulbs As Required; If The Unit Is An Integrated LED Assembly, Replace The Entire Lamp.
- Ensure Electrical Connectors Are Clean And Fully Seated. Check Gaskets And Seals For Damage And Replace If Necessary To Prevent Moisture Ingress.
- Test All Functions (Tail, Brake, Indicator) Before Reassembling Interior Trim.
Why The Part Most Commonly Fails
Failure Is Usually Caused By Physical Damage From Minor Collisions Or Impacts, Cracked Lenses Allowing Water Ingress, Corroded Connectors, Or Degraded Seals That Let Moisture Reach Bulb Holders Or Electronics. UV Exposure And Long-Term Vibration Can Also Cause Mounting Tabs Or Internal Components To Fail.
Service Life And Maintenance Tips
Tail Lamp Housings Typically Provide Long Service Life If The Lens And Seals Remain Intact. Inspect Seals And Connector Condition During Routine Service Intervals, Replace Bulbs With Correct Specifications, And Address Any Condensation Immediately To Avoid Corrosion Or Electrical Faults.
Why Choose This Unit
This Left Rear Lamp Is Supplied With Industry-Recognized Part Numbers (81560-0H152, B001031980), Making It Easy To Find And Fit The Correct Replacement. It Offers A Direct-Fit Solution For Mechanics And Experienced DIYers Seeking Reliable Restoration Of Rear Lighting Performance.
