Description
Interior Rearview Mirror for PEUGEOT 807 and CITROËN C8 with Auto-Dimming
This interior auto-dimming rearview mirror is designed for PEUGEOT 807 and CITROËN C8 vehicles and is identified by product codes 14852480XT and 8153SC. Ideal for professional mechanics and knowledgeable DIYers, the mirror reduces night-time glare from following traffic, improves driver comfort and safety, and restores original equipment functionality. Including the OEM codes in the description increases findability in searches and makes ordering straightforward for workshops and parts departments.
The mirror uses an auto-dimming (electrochromic) system: ambient and rear sensors detect bright light and automatically darken the reflective surface to cut glare. The unit integrates the dimming electronics and vehicle wiring connector for direct replacement on the original windshield mount. Fitment is intended for vehicles equipped from factory with an electrochromic interior mirror; check the vehicle’s existing mirror mount style before ordering to ensure proper installation.
Technical Information
- Manufacturer: Stellantis
- Model: PEUGEOT 807, CITROËN C8
- Product Codes: 14852480XT, 8153SC
- Other Numbers: None Specified
Compatibility And Fitment Notes
Compatible With PEUGEOT 807 And CITROËN C8 Models That Came From Factory With An Auto-Dimming Interior Mirror. Fitment Requires Matching The Windshield Mounting Bracket And Electrical Connector Type. If The Vehicle Has A Different Mirror Mount Or No Auto-Dimming Wiring, Additional Adapters Or Wiring May Be Required.
Installation Recommendations
- Recommended For Installation By Experienced Technicians Or Competent DIYers.
- Before Starting, Disconnect The Battery To Prevent Short Circuits And Avoid Risk To Airbag Systems.
- Common Steps: Remove Interior Trim Around The Mirror Base, Unplug The Electrical Connector, Release The Mirror From The Windshield Bracket (Slide Or Twist Depending On Mount), Fit The Replacement Onto The Bracket And Reconnect The Wiring.
- Use Appropriate Trim Tools To Avoid Damaging Headliner Or Trim. Verify Connector Pins Are Clean And Properly Seated Before Final Assembly.
Why This Part Most Commonly Fails
Auto-Dimming Mirrors Typically Fail Due To Electronic Component Degradation, Moisture Ingress, Corroded Or Damaged Wiring, Impact Or Vibration Damage From Accidents, Or Internal Sensor Malfunction. Symptoms Include Loss Of Dimming Function, Constantly Dark Or Light Mirror, Flickering, Or No Power To The Unit.
Notes For Professionals And DIYers
When Replacing The Mirror, Inspect The Windshield Mounting Plate And Wiring Loom For Damage. Clean Connectors And Apply Dielectric Protection If Needed. After Installation, Confirm Proper Operation Under Night-Time Conditions To Ensure Sensors And Electronics Function Correctly. Keeping The OEM Product Codes (14852480XT / 8153SC) Handy Helps Matching And Ordering The Correct Replacement.
