Description
Turbocharger intake hose for 1.6 HDI engines. Air connection clamp.
Product Description
High-quality replacement turbocharger intake/boost hose designed for 1.6 HDI diesel engines used in Citroën and Peugeot vehicles. This part ensures reliable transfer of compressed air between turbocharger and intake system and includes the air connection clamp for secure sealing. Frequently searched by part numbers 9651246880, 965124688080, 9689096280, 0382EY and 0382NZ, this hose is suitable for workshops and DIY mechanics looking for a direct-fit solution that restores proper boost pressure and drivability.
Compatibility
Intended For Vehicles Such As:
- Citroën Berlingo
- Citroën Xsara Picasso
- Peugeot Partner
Also Cross-Referenced With Part Codes Listed Below; Check Part Numbers When Searching.
How The Part Works And Why It Fails
The turbocharger intake/boost hose channels pressurised air from the turbocharger to the intercooler and intake manifold. Its function is critical for maintaining correct boost pressure, engine response and fuel economy. Common failure modes include material degradation from heat and oil exposure, clamp failure or loosening, damage from vibration or contact with nearby components, and splits caused by overboost or age. When the hose leaks, symptoms typically include loss of boost, rough idle, turbo flutter noise and increased smoke or poor acceleration.
Replacement Procedure
Recommended Steps For Replacement (General Guidance For Experienced Mechanics And Skilled DIYers):
- Allow The Engine To Cool Before Starting Work.
- Relieve Intake Pressure By Loosening Clamp Connections While Engine Is Cold.
- Loosen And Remove Hose Clamps; Carefully Remove The Old Hose From Turbo And Intercooler/Intake Connections.
- Inspect Mating Surfaces, Intercooler And Turbo Outlet For Oil Residue, Cracks Or Damage; Clean As Required.
- Fit The New Hose Ensuring Proper Orientation And Full Seating On All Connection Necks.
- Use Suitable Clamps (Preferably New Or Manufacturer-Approved Types) And Tighten To Manufacturer Specification.
- Start Engine, Check For Leaks Under Boost, And Perform A Road Test To Confirm Restored Performance.
Installation Recommendations
- Use High-Quality Clamps And Replace Any Damaged Clamp Securing Elements.
- Check For Oil Leaks From Turbocharger And Intercooler That Could Prematurely Degrade The New Hose.
- Inspect Turbo Shaft Play And Wastegate Function If Hose Damage Appears Related To Overboost.
- After Installation, Verify Boost Pressure And Engine Behavior Under Load.
Technical Information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Citroën Berlingo; Citroën Xsara Picasso; Peugeot Partner
- Product Codes: 9651246880; 965124688080; 9689096280
- Other Numbers: 0382EY; 0382NZ
Common Failure Cause
The Most Frequent Reasons For Failure Are Age-Related Material Degradation From Heat And Oil Contamination, Loose Or Corroded Clamps, And Mechanical Damage From Vibration Or Contact With Adjacent Components. Modified Engines With Increased Boost Levels Also Stress The Hose And Accelerate Wear.
Notes For Buyers
Often Found By Part Number Search: Use Codes 9651246880, 965124688080, 9689096280, 0382EY Or 0382NZ To Locate This Item Quickly. Recommended For Both Professional Workshops And Experienced DIY Mechanics Who Need A Direct-Fit Turbocharger Intake Hose For 1.6 HDI Engines.
