Description
Right passenger side mirror for Peugeot 307. Electrically adjustable and heated, electrically folding to the vehicle, temperature sensor. Color EZW – Gray metallic paint. 8 Pin (6+2).
This replacement right (passenger side) exterior mirror is designed for Peugeot 307 vehicles and offers full electric adjustment, heating element and power-folding function for convenience and safety. The integrated temperature sensor helps reduce fogging and improves demisting performance. The mirror is compatible with the 8-pin connector arrangement (6+2 pin configuration) used on affected models and is finished in EZW gray metallic paint for a factory-fit appearance.
Key Features
- Electric Adjustment: Precise motorized adjustment of mirror glass for quick setup.
- Heated Glass: Built-in heating element to clear ice and condensation faster.
- Power-Folding: Electrically foldable to reduce risk of damage in tight parking situations.
- Temperature Sensor: Assists demisting and can be used by vehicle climate systems.
- Connector: 8 Pin (6+2) wiring harness for direct replacement.
- Finish: EZW Gray Metallic Paint for correct visual match.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 307 (First Generation)
- Product Codes: 8149VT
- Other Numbers: EZW (Color Code), 8 Pin (6+2), EZWD (referenced in some listings)
Installation Recommendations
Installation is suitable for experienced DIYers and professional mechanics. Typical replacement procedure:
- Park the vehicle on a level surface, engage the parking brake and disconnect the negative battery terminal to avoid short circuits when working on electrical components.
- Remove the interior door trim or triangular trim cover to access the mirror mounting bolts and electrical connector. Keep fasteners and clips organized.
- Unplug the mirror wiring harness (8-pin) and carefully remove the mounting bolts holding the mirror to the door.
- Fit the new mirror, route the harness without pinching, connect the electrical plug and loosely tighten the bolts. Verify correct operation (adjustment, heating, folding) before fully torquing fasteners to manufacturer specification.
- Reinstall interior trim pieces and reconnect the battery. Check all mirror functions and adjust mirror glass as required.
Why This Part Fails Most Often
- Mechanical Damage: Impacts and knocks are the most common cause of mirror replacement (parking incidents, road debris).
- Water Ingress and Corrosion: Moisture can corrode connectors and motors, especially in older vehicles or after door panel repairs.
- Wear Of Actuator Motors: Frequent adjustment and folding cycles can wear the small electric motors and gears over time.
- Electrical Faults: Broken wires, connector damage or failed heating elements can stop mirror functions.
- Freezing And Ice Build-Up: Repeated exposure to ice can overload the heater and moving parts if not properly cleared.
Additional Notes
Check the connector pin count and color code when ordering to ensure compatibility: this unit uses an 8-pin (6+2) connector and is color-coded EZW (gray metallic). When replacing heated or powered mirrors, always verify operation of adjustment motors, heating element and folding function before completing the installation. Regularly inspect door seals and connectors to reduce risk of corrosion and premature failure.
Recommended For
Professional Auto Technicians And Competent DIYers Working On Peugeot 307 Vehicles Who Need A Direct-Fit Right Passenger Side Heated And Power-Folding Mirror (Product Code 8149VT).
