Description
Electric central locking lock for left rear door. For Peugeot 206 and 406 Combi. Driver’s side.
Reliable replacement electric lock for the central locking system, designed specifically for the left rear door of Peugeot 206 and Peugeot 406 Combi models. Ideal for workshops and experienced DIY mechanics who need a direct-fit part often searched by OE number. The unit replaces the door latch/actuator assembly and restores remote and central locking function for the rear left door, ensuring secure closing and unlocking from the vehicle’s central locking system.
Technical Information
- Manufacturer: Stellantis (Citroën Peugeot)
- Model: Peugeot 206; Peugeot 406 Combi
- Product Codes: 913758
- Other Numbers: None Available
Function And Application
The unit is an electromechanical door lock/actuator that receives signals from the vehicle’s central locking system to lock and unlock the left rear door. It contains the motor/gear assembly and microswitches that operate the latch mechanism. Proper operation is essential for passenger security and correct door closure. This part is a direct fit for the left rear (driver’s side) door on compatible 206 and 406 Combi models.
Replacement Procedure (General Guideline)
- Remove the interior door trim carefully to access the lock assembly—take care with retaining clips and trim fasteners.
- Disconnect the electrical connector and unclip any door latch rods or linkages (note their positions for reassembly).
- Unscrew the mounting bolts and remove the old lock/actuator from the door shell.
- Transfer any required linkage or retaining hardware to the replacement unit if necessary, then fit the new lock in position.
- Reconnect the electrical connector, reattach linkages, and temporarily test the central locking operation before reinstalling the door trim.
- Reinstall the door trim, check all fasteners, and perform final functional tests (lock/unlock with remote, manual operation, and door open/close behavior).
Installation Recommendations
- Work on a cool, dry day and protect the door trim and interior from scratches with cloths or cardboard.
- Mark rod and clip positions or take photos before removal to ensure correct reassembly.
- Apply a light dielectric grease to electrical connectors to reduce corrosion risk and ensure good contact.
- Lubricate latch moving parts with appropriate light grease during assembly to reduce wear and noise.
- After installation, cycle the lock several times and confirm correct alignment of the striker to avoid premature wear.
Why The Part Most Commonly Fails
Failures typically result from a combination of mechanical wear and environmental exposure. Common causes include:
- Plastic gear wear or stripped teeth inside the actuator motor assembly after many cycles.
- Water ingress and corrosion affecting electrical contacts or small mechanical components—especially in older seals or if door drains are blocked.
- Broken or weakened linkage rods and clips that stress the actuator during operation.
- Failure of internal microswitches or the small DC motor due to age, heavy use, or contamination.
Notes For Buyers
This part is commonly searched by OE number 913758. Ensure the application (Peugeot 206 or Peugeot 406 Combi, left rear/driver’s side) matches your vehicle before installation. Suitable for professional fitment or experienced DIY mechanics comfortable with door trim removal and basic electrical checks.
