Description
Socket for the left rear lamp with wiring for PEUGEOT 206 3/5 door vehicles up to production month 6/2003. Comes with a piece of wiring. Side: Passenger side. Not rusty or heat-damaged, fully functional; functionality of the bulbs themselves is not guaranteed.
High-quality replacement lamp socket and short wiring harness for Peugeot 206 models, ideal for professional workshops and DIY mechanics. This part restores reliable contact between the vehicle wiring and the rear lamp cluster, ensuring brake, tail, and indicator lamps operate without intermittent faults caused by worn or corroded connectors. Often searched under product code 6351P1 — include this reference when locating the part.
Technical Information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 206 (3/5 Door) – Up To 06/2003
- Product Codes: 6351P1
- Other Numbers: None Provided
Function And Application
The socket secures the bulbs in the rear lamp cluster and provides the electrical connection to the vehicle wiring. It supports filaments for tail, brake and indicator bulbs. A reliable socket is crucial for stable light output and safe signaling. Compatible with original equipment wiring layout for the listed Peugeot 206 variants.
Replacement Procedure
- Open the tailgate/boot and remove the interior trim panel to access the lamp cluster.
- Unscrew or unclip the lamp unit from the body and pull the unit out enough to reach the bulb sockets.
- Unplug the wiring harness connector from the socket and remove the socket by twisting or unclipping, depending on lamp type.
- Install the new socket with wiring: insert and secure the socket into the lamp cluster, reconnect the harness, and check that the wiring routing matches the original to avoid pinching.
- Test all lamp functions (tail, brake, indicator) before reassembling the trim and closing the boot.
Installation Recommendation
Work Should Be Performed By A Trained Technician Or An Experienced DIY Mechanic. For Safety, Isolate The Electrical System Or Disconnect The Battery Before Starting Work To Avoid Short Circuits. Ensure Connectors Are Fully Seated And Wiring Is Routed Clear Of Sharp Edges And Moving Parts. If The Lamp Unit Uses Clips, Avoid Excessive Force To Prevent Breakage.
Why This Part Fails Most Often
Common causes of socket failure include moisture ingress leading to corrosion of contacts, heat damage from overheated bulbs or poor contact, brittle or cracked plastic from age and UV exposure, and mechanical damage from impacts or improper removal. Failures typically appear as intermittent lighting, increased resistance causing dim lights, or complete loss of function on the affected lamp circuit.
Notes
This item is delivered with a short section of wiring as described. The listing information includes both a product title and a detailed description; the detailed description indicates the socket as left rear (passenger side) while title references may differ. Verify the required side and product code 6351P1 when replacing to ensure correct fitment.
