Description
Right Front Pyrotechnic Seat Belt Citroën Xsara Picasso. Color FGW – DIGIMAT. Passenger Side.
This right front pyrotechnic seat belt assembly is intended for Citroën Xsara Picasso passenger-side applications and is commonly referenced by OEM codes 96314386GW and 8973LJ. The unit combines the retractor, webbing and pyrotechnic pretensioner to secure the occupant in the event of a collision by removing slack and helping to reduce forward movement. Ideal for professional workshops and experienced DIY enthusiasts looking for a direct-fit replacement part.
Key Benefits
– Direct fit for Citroën Xsara Picasso (passenger side).
– Includes pyrotechnic pretensioner for immediate belt tensioning during impact.
– Frequently searched by part numbers 96314386GW and 8973LJ — include these codes when looking up compatibility or sourcing.
Usage And Function
The pyrotechnic pretensioner activates in the event of a significant crash, igniting a small pyrotechnic charge that retracts the belt webbing and removes slack in milliseconds. The seat belt assembly works together with airbags and vehicle restraint sensors to manage occupant deceleration. Outside of activation events, the retractor functions as a standard inertia retractor allowing normal belt extension and locking under sudden deceleration.
When To Replace
Replace the seat belt immediately if the pretensioner has been activated in a crash, if the webbing is frayed, cut or heavily stained, if the buckle or latch shows damage, or if the retractor does not lock properly. Even without visible damage, belts that have been subjected to strong impact forces should be replaced to ensure occupant safety.
Mounting Recommendations
– Always disconnect the vehicle battery before starting work to avoid accidental activation of pyrotechnic components and to protect vehicle electronics.
– Remove interior trim panels carefully to access B‑pillar fixings; avoid prying on clips that could break. Keep mounting bolts and spacers in their original positions.
– Torque all fasteners to manufacturer specification where available; if torque specs are not available, tighten securely but avoid over-torquing to prevent thread or component damage.
– After installation, check belt routing, buckle operation and retractor function. Ensure the belt webbing runs freely and locks under a sharp pull test.
– Professional installation is recommended when the pretensioner or airbag systems are involved.
Reason Part Most Commonly Fails
The most frequent causes of seat belt assembly failure are activation during a collision (which irreversibly deploys the pyrotechnic pretensioner), corrosion or contamination of internal components, electrical connector faults to the pretensioner squib, and mechanical wear or damage to the webbing and buckle. Long-term exposure to moisture, salts or heavy soiling accelerates corrosion and degradation of moving parts.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën Xsara Picasso
- Product Codes: 96314386GW, 8973LJ
- Additional Numbers: Color FGW – DIGIMAT; Right Front / Passenger Side
Notes For Professionals
When replacing a pyrotechnic seat belt assembly, inspect associated restraint system components (airbag warning lamp, crash sensors, wiring harness and connectors) for damage or signs of corrosion. Any deployed pretensioner must be replaced — do not attempt to reuse or repair a deployed unit. Verify system fault codes after installation using professional diagnostic equipment and clear as required following the manufacturer’s procedures.
