Description
Button for opening the electric lock of the rear tailgate for PEUGEOT 407 Sedan. Color KKQ – Paint Red Profond.
This genuine-style replacement tailgate release button is designed for Peugeot 407 Sedan owners and professional technicians who require a direct-fit, serviceable solution. Supplied with product codes frequently searched by mechanics (872565, 872558), it restores reliable electrical actuation of the rear tailgate lock and matches the factory exterior finish in KKQ Red Profond where applicable. Ideal for repair shops and DIY enthusiasts seeking an original-fit exterior switch that integrates with the existing lock mechanism and wiring harness.
Key Features
- Direct-fit replacement for the electric tailgate/boot lock release switch on Peugeot 407 Sedan.
- Exterior color code KKQ (Paint Red Profond) to match factory finish.
- Electrical connector and mounting design compatible with original tailgate trim for straightforward installation.
- Commonly referenced by product numbers 872565 and 872558—enter these codes when searching or ordering.
Fitment And Compatibility
Designed specifically for Peugeot 407 Sedan body style. Confirm the part number matches the vehicle’s existing switch (872565 or 872558). This switch is intended for models with an electrically actuated rear tailgate lock; it may differ from estate (SW) or other variants in trim shape and mounting.
How The Part Is Replaced
Replacement is a moderate task for a trained technician or experienced DIYer:
- Open the tailgate and remove interior trim panel (clips and fasteners) to access the switch mounting.
- Disconnect the electrical connector from the switch—note connector orientation and locking clip.
- Unclip or unscrew the faulty switch from its bezel and remove it from the tailgate outer panel.
- Install the new switch into the bezel, secure mechanically, reconnect the electrical connector and test operation before refitting trim.
- Reinstall interior trim and verify proper lock/unlock and tailgate release function from the switch and remote controls.
Installation Recommendations
- Disconnect the negative battery terminal before starting work to avoid accidental short circuits or unintended locking/unlocking during installation.
- Handle trim clips and fasteners carefully to avoid breakage; use trim tools to reduce risk of damage to panels.
- Check the connector for corrosion or bent pins before fitting the new switch; clean contacts if necessary to ensure reliable electrical connection.
- After installation, verify operation several times and check that the tailgate closes and locks correctly.
Why This Part Commonly Fails
Tailgate release switches are exposed to frequent use and environmental stresses. Typical failure causes include:
- Water Ingress And Corrosion: Seals around the tailgate can deteriorate, allowing moisture to reach the switch and corrode electrical contacts.
- Mechanical Wear Or Impact: Repeated pressing, rough handling, or accidental impact can crack the plastic bezel or damage the internal mechanism.
- Electrical Contact Wear: Internal contacts can become pitted or lose conductivity after many cycles, causing intermittent or complete loss of function.
- Wiring Or Connector Damage: Chafed wiring, damaged insulation, or loose connectors at the switch can create faults that mimic switch failure.
Typical Symptoms Indicating Replacement
- Pressing the tailgate release yields no response or intermittent operation.
- Switch feels loose, sticks, or is physically damaged/cracked.
- Tailgate must be opened using remote or internal release only; external button unresponsive.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 407 Sedan
- Product Codes: 872565, 872558
- Additional Numbers: KKQ (Color Code), NFP
