Description
Right wing mirror for PEUGEOT 407 vehicles
Electrically adjustable, electrically folding, heated, temperature sensor
Color EXL – OBSIDIAN BLACK PAINT
Passenger side
Various colors available
Part description
This used right wing mirror for Peugeot 407 on the passenger side is a suitable choice when replacing a damaged mirror. It offers electric adjustment, electric folding, heating and a temperature sensor. When choosing a replacement, compare not only its appearance but also the electrical connection and equipment of the original mirror.
The part is listed under numbers 96457004XT and 8149VC, which make it easier to find the matching version. The specified color is EXL – OBSIDIAN BLACK PAINT; EXLD also appears in the product designation. Various colors are available, so pay attention to the color of the specific item when making your selection.
Technical information
- Manufacturer: not specified
- Model: Peugeot 407
- Part type: exterior wing mirror, complete assembly
- Side: right, passenger side
- Adjustment: electric
- Folding: electric
- Equipment: heated, temperature sensor
- Color: EXL – OBSIDIAN BLACK PAINT
- Condition: used part
- Additional number: EXLD – supplementary designation from the source materials
Product codes
- Product codes: 96457004XT, 8149VC
- Designation in the source materials: EXLD
- Model: Peugeot 407
Check the number match together with the connector version, mounting points and mirror functions. Matching color alone is not sufficient to select the correct replacement.
Installation recommendations
The following procedure generally applies to this type of part. The exact method for accessing the fasteners, removing the trim and disconnecting the electrical system depends on the specific vehicle version. Follow the manufacturer’s service procedure.
1) Before installation
- Compare the product numbers, right-hand version, base shape and mounting points with the old mirror.
- Check the connector shape, number and arrangement of contacts, and confirm that the functions match: adjustment, folding, heating and temperature sensor.
- Inspect the glass, cover, mounts, wiring and sealing surfaces. Look for cracks, damaged insulation and oxidized contacts.
- Do not force the electrically folding mechanism by turning it by hand.
2) Tools and materials required
Suitable hand tools for the fasteners used, a plastic trim removal tool, protective tape for the paintwork, a soft pad and a cloth for cleaning the mating surfaces are usually sufficient. A multimeter and the wiring diagram for the specific vehicle can be used to diagnose any electrical fault.
3) Step-by-step installation procedure
- Secure the vehicle against movement and, if possible, check the functions of the original mirror to distinguish a faulty part from an electrical system fault.
- Turn off the ignition and secure the electrical system according to the manufacturer’s instructions. If the battery needs to be disconnected, follow the prescribed procedure.
- Protect the surrounding paintwork and carefully remove the covers or trim needed to access the connector and mounting points.
- Note the wiring route. Release the connector lock and disconnect it by pulling on the connector body, not the wires.
- Support the mirror from the outside and gradually undo the fasteners. Do not let its weight hang from the wiring.
- Remove the original mirror and clean the mating surface. Check the condition of the seal and the area around the mounting points.
- Position the replacement mirror, fit the seal correctly and route the wiring so that it cannot be pinched.
- Start the fasteners without forcing them, check that the base is seated correctly and tighten them according to the manufacturer’s instructions.
- Connect and secure the connector. Return the wiring to its original route, away from moving parts.
- Restore power using the prescribed procedure and check the functions. If everything is working properly, finish installing the covers and trim.
4) Post-installation checks and function verification
Test electric adjustment in both directions, folding and return to the operating position. Check the heating under the conditions specified for activation in the vehicle manual. Also check that the outside temperature reading is accurate once it has stabilized. Adjust the mirror for a clear view and check that it is securely mounted before driving. During a short test drive, watch for image vibration and unusual aerodynamic noise.
5) Common installation mistakes and how to avoid them
- Incorrect electrical version: compare the connectors, contacts and all functions before installation.
- Pinched wiring: check its routing and position before tightening.
- Incorrectly seated seal: install on a clean mating surface and check that it sits evenly.
- Overtightened fasteners: follow the service instructions to avoid damaging the base or mounts.
- Forcing the mirror to fold: operate the mechanism electrically; if it resists, identify the cause first.
Reasons why the part gets damaged
Common causes of damage to exterior wing mirrors include impacts while parking, contact with an obstacle or forcibly turning the folding mechanism. Vibrations caused by loose installation can also damage the glass, cover and mounting points.
- Moisture and contact corrosion can cause the electric adjustment, heating or temperature sensor to fail intermittently.
- Wear of the motor and gears may result in irregular movement, noise or folding failure.
- Ice and mechanical obstruction increase the load when attempting to adjust or fold the mirror.
- Damaged wires or connector can interrupt power or signal transmission even if the mechanism itself remains functional.
