Description
Cable For The Central Locking Mechanism Of Left And Right Front Doors. For Peugeot 307 Vehicles.
Overview
High-quality replacement control cable designed for the central locking system of the front doors on Peugeot 307 models. This door lock cable (product code 9151V6) connects the interior lock mechanism to the actuator, ensuring reliable mechanical transmission of locking and unlocking commands. Suitable for both Left And Right Front Doors, it is a common service item for vehicles with mechanical linkage from the lock to the central locking actuator.
Why Choose This Part
Engineered for easy fitment and direct replacement of the worn or broken original cable, this part restores smooth operation of the door lock and prevents issues such as door not locking/unlocking or partial locking. The part is aimed at professional technicians and experienced DIY enthusiasts who need a dependable OE-compatible replacement with clear product coding for fast identification (9151V6).
Technical Information
- Manufacturer: Stellantis (Peugeot)
- Model: Peugeot 307
- Product Codes: 9151V6
- Additional Numbers: NFP
Installation Recommendations
Before starting, ensure ignition is off and central locking is disabled to avoid accidental activation. Typical replacement steps:
- Remove the door trim panel using appropriate trim tools to avoid damage to clips and upholstery.
- Locate the door lock mechanism and the existing cable routing; note the position of retaining clips and guide channels.
- Disconnect the cable from the lock lever and the actuator rod—retain any original clips if reusable or replace with new clips where necessary.
- Route the new cable following the original path, secure it in guide channels and clip points, and attach it to the lock and actuator.
- Operate the lock manually and with the central locking command to verify smooth movement and correct travel before reassembling the door panel.
Recommended Tools: Trim remover set, Torx/Phillips screwdrivers (depending on vehicle trim), pliers, and a flashlight. Approximate Time: 30–60 minutes per door for an experienced technician; allow more time for first-time DIY installers.
Most Common Failure Reasons
- Mechanical Wear: Repeated use causes cable stretch or internal wear, leading to slack and loss of positive engagement.
- Broken Plastic Clips Or Connectors: Clips that secure the cable often become brittle with age and break, allowing the cable to disengage or misalign.
- Corrosion And Moisture Ingress: Water entering the door cavity can corrode metal ends or cause swelling of plastic parts, impairing movement.
- Damage From Impact Or Forced Operation: Door impacts or forcing a stuck lock can bend or snap cable ends.
Practical Tips
- Inspect All Linkages And Clips During Replacement; replacing worn clips at the same time prevents future failures.
- Lubricate Moving Contact Points Lightly With Suitable Grease To Reduce Wear And Prevent Noise.
- After Installation, Cycle The Lock Several Times And Check Central Locking Function From Both The Remote And Interior Switches.
Compatibility And Identification
This cable is specified for Peugeot 307 front doors and is commonly searched under the OE code 9151V6. Always verify match by comparing the part code and physical shape to the original assembly before installation.
