Description
Lock set for Peugeot 206 – driver door, passenger door
Fuel Cap and Ignition Barrel + 1x Key
Door Lock with White Latch Is Not Functional
High-quality replacement lock set designed for Peugeot 206 vehicles, ideal for professional mechanics and experienced DIY enthusiasts. This kit contains the main mechanical locking components used daily: driver and passenger door locks, the fuel cap lock and the ignition barrel, supplied with one key. Note that one door lock fitted with a white plastic latch is currently non-functional and may require repair or replacement of the latch mechanism. Search keywords: Peugeot 206 lock set, 4162EW, 4162Z1, door lock kit, ignition barrel replacement.
Function And Application
The locks in this set secure vehicle access, operate the central locking system where fitted and provide ignition switching via the barrel and key. The kit is intended primarily for Peugeot 206 models (hatchback variants such as 3‑door and 5‑door). Compatibility depends on equipment and part codes listed below — verify the part numbers against the original component before installation.
How The Part Is Replaced
Typical replacement steps for the door locks and ignition barrel:
- Door Locks: Remove the interior door trim and water shield to access the lock assembly. Disconnect rods and electrical connectors (if central locking actuator present), remove mounting screws and slide the old lock out. Fit the new lock, reconnect linkages and check mechanical movement before refitting trim.
- Ignition Barrel: Remove steering column covers, extract any retaining clip or fixing screw and withdraw the old barrel. Install the new barrel aligned with the steering lock and test key operation before reassembling trims.
- Fuel Cap: Remove the filler-flap trim or hinge screws as required and swap the cap assembly. Ensure proper sealing and operation of the flap catch.
Installation Recommendations
- Work With The Door Open And The Vehicle Secure; Use Suitable Trim Tools To Avoid Damage.
- Inspect Linkages And Actuator For Wear Or Corrosion And Replace If Necessary.
- Lubricate Lock Mechanisms With A Dry Graphite Or Silicone-Based Product Suitable For Automotive Locks; Avoid Heavy Greases That Attract Dirt.
- After Fitting, Verify Smooth Mechanical Operation And Central Locking Function (If Applicable) On All Doors, Ignition And Fuel Flap.
- Keep The Supplied Key Safe And Check That It Operates All Fitted Locks Before Reassembling Trim.
Most Common Failure Reasons
- Plastic Latch Breakage: Small white plastic components inside the lock can become brittle and break, leading to non-functional latches — this is consistent with the current non-functional door lock in this set.
- Corrosion And Water Ingress: Moisture in the door or filler area causes corrosion of metal parts and seizing of mechanisms.
- Wear Of Tumblers And Keys: Frequent use and worn keys can prevent correct engagement of the ignition barrel.
- Actuator Failure: Central-locking actuators fail electrically or mechanically, giving the impression of a faulty lock.
- Mechanical Impact Or Vandalism: Forced entry attempts can deform or break locking components.
Technical Information
- Manufacturer: Stellantis (Peugeot/Citroën)
- Model: Peugeot 206
- Product Codes: 4162EW, 4162Z1
- Other Numbers: 4162NR, 1692330580
Notes
This kit is supplied with one key. The set includes a door lock that currently has a non-functional white latch — consider inspecting or replacing the plastic latch during installation. Always match the codes above to the original part number on the vehicle to confirm compatibility.
