Description
Bulb holder with a piece of wiring for the rear left lamp for Citroën Xsara Picasso. The socket is in perfect condition and fully functional. Supply of bulbs or their functionality is not guaranteed. Side: Driver Side.
Product Overview
High-quality replacement bulb holder with a short length of wiring designed for the left rear tail lamp of the Citroën Xsara Picasso. This direct-fit part is often searched by product codes 6350N0, 6350T2 or 9631564080 and is ideal for professional workshops and DIY mechanics looking for a reliable lamp socket assembly for brake/taillight and indicator applications.
Features And Function
- Designed To Hold P21/5W Combination Bulbs For Brake And Tail Functions.
- Includes Short Wiring Pigtail For Easier Replacement Without Splicing The Main Harness.
- Standard 2/3-Pin Socket Configuration Depending On Application, With Push/Turn Or Clip-In Mounting.
- Plastic Body With Metal Contact Terminals To Ensure Electrical Connection Between Bulb And Vehicle Wiring.
Compatibility
Fits Citroën Xsara Picasso rear left tail light assemblies where the original part numbers 6350N0 / 6350T2 / 9631564080 are specified. Check the lamp type and socket shape on the vehicle to confirm fitment before installation.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën Xsara Picasso
- Product Codes: 6350N0, 6350T2, 9631564080
- Additional Numbers: (N68), 6350.N0, 6350.T2, 6350N0, 6350T2, 9631564080, P21/5W
Installation Recommendations
- Disconnect Battery Before Starting Work To Avoid Short Circuits And Accidental Bulb Activation.
- Access The Rear Lamp From Inside The Boot Or By Removing The Lamp Assembly According To Vehicle Instructions.
- Remove The Old Socket By Unplugging The Connector And Releasing Any Clips Or Screws Holding The Holder In Place.
- Compare New Socket With Old One For Pin Layout And Bulb Type. Transfer Any Rubber Seals If Required.
- Install The New Socket By Securing Clips/Screws, Plugging In The Connector And Fitting The Correct Bulb Type (P21/5W Where Applicable).
- Use Dielectric Grease On Contacts To Reduce Corrosion Risk And Ensure A Reliable Connection.
- Test All Light Functions Before Reassembling Trim Panels.
- If Wiring Is Damaged, Repair With Proper Automotive Connectors Or SOLDER And HEAT-SHRINK, Do Not Rely On Twist Connectors For Long-Term Repair.
Why This Part Commonly Fails
- Corrosion On Metal Contacts Caused By Moisture Ingress Leading To Intermittent Or Lost Electrical Contact.
- Heat Damage From Overloaded Bulbs Or Poor Contact Causing Plastic To Deform Or Melt.
- Mechanical Fatigue And Vibration Leading To Broken Clips Or Cracked Socket Housings On Older Cars.
- Abrasion Or Insulation Damage To The Wiring Causing Short Circuits Or Open Circuits.
- Failure Frequency Depends On Vehicle Age And Environmental Exposure; Salt, Road Debris And Repeated Bulb Changes Increase Failure Likelihood.
Additional Notes
This socket assembly is supplied without bulbs. When replacing, fit the correct bulb type and check the lamp lens and seals to prevent future moisture-related failures. Suitable for professional fitment or competent DIY installation following standard automotive safety practices.
