Description
Right rear lamp, light for Citroën C2. Original.
This right rear tail lamp is a direct-fit replacement for the Citroën C2 and is ideal for professional workshops and DIY mechanics looking for a reliable OEM-quality part. Supplied under code 6351S7, the unit restores rear light functions including tail, brake, indicator and reverse (depending on vehicle specification) and helps maintain road safety and vehicle appearance. Clear, searchable identifiers such as Citroën C2, rear light and 6351S7 improve findability for technicians searching by part number.
Key Features
- Direct replacement for Citroën C2 rear right lamp — designed to original equipment specifications.
- OEM quality: ensures correct fit, alignment and light output for brake, tail and indicator functions.
- Part Number: 6351S7 for fast identification and ordering.
- Complete lamp assembly ready to install — includes housing, lens and sockets (bulbs sold separately depending on version).
Function And Typical Failure Modes
The rear lamp assembly houses the signal and illumination bulbs (or LEDs on some versions) and provides sealed protection against moisture and dust. The most common reasons for replacement are cracked or faded lenses from impact or UV exposure, water ingress causing corrosion or electrical faults, and broken mounting points after minor collisions. Burnt bulbs or socket corrosion can also cause light failure, but in many cases the entire assembly is replaced to restore correct beam pattern and alignment.
Replacement Procedure (General Guide)
- Prepare: Park on level ground, switch off ignition and, for safety, disconnect the negative battery terminal when working on electrical connections.
- Access: Open the boot and remove the trim or access panel behind the lamp to reach the fixing nuts and wiring connector.
- Remove: Unscrew the retaining nuts or bolts, carefully pull the lamp assembly out, and disconnect the wiring harness by unclipping the connector.
- Fit New Unit: Connect the wiring harness to the new lamp, position the assembly in the body aperture and secure with the original fasteners. Ensure correct alignment and sealing against the body.
- Test: Reconnect the battery (if disconnected) and test all light functions — tail, brake, indicator and reverse — before reassembling interior trim.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C2
- Product Codes: 6351S7
- Other Numbers: No additional numbers available
Installation Recommendations
Use original or OEM-spec fasteners and replace any damaged clips to ensure a secure fit and proper sealing. If water ingress is present, inspect surrounding body seals and repair corrosion before fitting the new lamp. When replacing bulbs, use the correct type and wattage specified by the vehicle manufacturer to avoid overheating and premature failure. After installation, verify alignment and operation of all functions.
Why This Part Fails Most Often
Rear lamps typically fail due to physical damage (impacts, parking knocks), environmental degradation (UV fading, cracked lenses) and moisture ingress leading to electrical faults or corrosion. Poor sealing around the lamp aperture accelerates damage. Replacing the complete assembly is often the most reliable way to restore function and water-tightness.
Order by Part Number 6351S7 to quickly locate the correct right rear lamp for Citroën C2 and ensure a fast, accurate replacement for workshop or home repair use.
