Description
Left rear lamp light for PEUGEOT 107 2013
Socket with bulb can be purchased separately
Can be used on Citroën C1
Driver’s side
Product Overview
High-quality left rear tail lamp assembly compatible with Peugeot 107 (2013) and compatible with first-generation Citroën C1. Ideal for mechanics and DIY enthusiasts looking for a direct-fit replacement part identified by OE code 81560-0H090 and reference 1607990580. The unit houses the tail, brake, and indicator functions in a single compact assembly; bulb holder can be ordered separately if required.
Compatibility
Designed For: Peugeot 107 (2013)
Also Fits: Citroën C1 (first generation / equivalent rear lamp layout)
Fitment: Left / Driver’s Side
Function And Common Faults
Function: The rear lamp assembly provides tail light illumination, brake light, and turn signal indication. It ensures visibility and safety at the rear of the vehicle and integrates with the vehicle wiring harness via a plug-in connector and a removable bulb socket.
Why It Fails: Rear lamp failures are most commonly caused by impact damage (minor collisions or parking knocks), water ingress through damaged seals causing corrosion of contacts or sockets, and brittle or cracked lenses from age and UV exposure. Bulb holders and connectors can also corrode or loosen, causing intermittent operation.
How To Replace
Typical Replacement Steps (general guide for experienced technicians):
1. Disconnect the vehicle battery before starting.
2. Access the lamp from inside the trunk or luggage compartment by removing the trim panel to reach the mounting screws and connector.
3. Unscrew the retaining bolts and carefully pull the lamp assembly outwards.
4. Unplug the wiring connector and remove the bulb socket if replacing separately.
5. Fit the new lamp assembly, connect the wiring plug, secure the mounting bolts, and reassemble trim.
6. Reconnect the battery and check all lamp functions (tail, brake, indicator) before finishing.
Note: Follow manufacturer torque specifications and trim removal procedures to avoid damaging clips or body panels.
Technical Information
Manufacturer: Stellantis (Citroën / Peugeot)
Model: Peugeot 107 (2013) / Compatible With Citroën C1
Product Codes: 81560-0H090
Additional Numbers: 1607990580
Installation Recommendations
Installation Tips: Always disconnect the battery before removal and wear eye protection when working with bulbs. Inspect the wiring connector and body seal—replace the bulb holder or seal if corrosion or damage is present. Use dielectric grease on contacts to slow future corrosion. After installation, verify that all light functions operate correctly and that the lamp sits flush to the body to maintain proper sealing.
Why Choose This Part
This tail lamp is an economical direct-fit solution for restoring rear lighting and safety to Peugeot 107 and compatible Citroën C1 models. Provided product codes (81560-0H090, 1607990580) make it easy to locate the correct assembly. Suitable for professional workshops and competent DIY mechanics who require a reliable replacement lamp assembly.
Additional Notes
If the bulb socket is not included, the socket and bulb can be purchased separately. Check the bulb type and holder before ordering to ensure you have the correct replacement bulbs and accessories on hand.
