Description
Right rear lamp for Peugeot 308 T7 SW. Passenger side.
Description
Direct-fit right rear tail lamp assembly designed for the Peugeot 308 T7 SW (passenger side). This unit replaces the original lamp and restores rear lighting functions including stop, tail, turn signal and side marker (depending on vehicle equipment). Commonly searched by product codes 96814438XT, 25950206 and 6351FF, making it easy to find this exact part for workshop or DIY repairs.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 308 T7 SW (Rear Right / Passenger Side)
- Product Codes: 96814438XT
- Other Numbers: 25950206, 6351FF
Fitment / Applications
Fits Peugeot 308 T7 SW models requiring the passenger-side rear light assembly. Check the part numbers listed above to confirm match with the original lamp on the vehicle.
Installation Recommendations
- Prepare tools: trim remover, socket set (typically small metric sizes), and a torque driver if required for body screws.
- Open tailgate and remove interior trim panel to access the lamp retaining nuts/screws. In some versions trim clips must be carefully released to avoid damage.
- Unscrew the retaining fasteners and gently pull the lamp assembly outward. Disconnect the electrical connector(s) by releasing the locking tab.
- Transfer any bulbs or gaskets if the replacement does not include them, and ensure sealing surfaces and gaskets are clean before fitting the new unit.
- Reconnect the electrical connector, refit the lamp and torque fasteners to manufacturer values. Reinstall interior trim and test all lamp functions (stop, tail, indicator, reverse if integrated).
- After installation, verify proper operation from inside the vehicle and from the rear. Replace damaged seals to prevent water ingress.
Why This Part Fails
Rear lamp failures are most often caused by water ingress due to damaged seals or cracked housings, impact damage from collisions, or connector corrosion. Incandescent bulbs can burn out from normal use, while full-module failures can occur in integrated units because of moisture or electrical issues. Faults may also appear after minor accidents where the lamp housing is stressed but not visibly broken.
Typical Lifespan And Maintenance Tips
There is no fixed replacement interval for tail lamps — life depends on usage and exposure. Regularly inspect lamp lenses and seals for cracks or moisture, clean connectors and ensure secure mounting. Replace any failing gaskets and repair wiring corrosion promptly to extend service life.
Notes For Mechanics And DIYers
This lamp is suitable for professional garages and competent DIY installers. Keep the electrical connector dry and free of corrosion, and handle the lamp assembly carefully to avoid scratching the lens. When transferring bulbs or seals between old and new units, use appropriate gloves to avoid contaminating bulb surfaces.
Keywords
Peugeot 308 SW rear lamp, Right Rear Tail Light, Passenger Side, 96814438XT, 25950206, 6351FF, Tail Lamp Replacement
