Description
Sun Visor For CITROËN BERLINGO II And PEUGEOT PARTNER II. This Is A Used Item And May Be Slightly Soiled. The Right Detachable Hinge May Not Be Included. Left Side – Driver.
Replacement Driver-Side Sun Visor Designed For Citroën Berlingo II And Peugeot Partner II. Ideal For Professional Workshops And Do-It-Yourself Mechanics Looking To Replace A Worn Or Broken Visor With An OE-Fit Part. Commonly Searched Under Part Numbers 8143TG And 1618180980, This Unit Matches Interior Trim And Mounting Points On Second-Generation Berlingo/Partner Models (2008–2018).
The Visor Provides Standard Sun Shielding For The Driver, With Original Mounting Points To Ensure Proper Fit And Function. As This Is A Used Part, Expect Minor Surface Soiling And Possible Signs Of Normal Wear. Note That The Right Detachable Hinge May Be Missing — Inspect The Item And Photos Carefully If Your Installation Requires Transfer Of The Hinge.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model(s): Citroën Berlingo II, Peugeot Partner II (2008–2018)
- Product Codes: 8143TG, 1618180980
- Additional Numbers: Commonly Referenced In Interior/Visor Categories; See Photos And Part Labels
Installation Recommendations
- Prepare Tools: Trim pry tool, Torx or Phillips screwdriver depending on fasteners, and replacement clips if needed.
- Remove Trim Cover: Pry off the plastic cover that conceals the mounting screws or clips on the headliner.
- Disconnect Any Wiring: If The Visor Has An Illuminated Vanity Mirror, Unplug The Electrical Connector Before Fully Removing The Unit.
- Unscrew/Unclip The Bracket: Remove Mounting Screws And Carefully Release The Retaining Clip; Support The Visor To Prevent Damage To The Headliner.
- Fit And Test: Transfer Any Required Hinge Or Clips From The Old Unit If Missing, Fit The Replacement, And Check Range Of Motion Before Final Tightening.
- Use New Fasteners If Damaged: Replace Broken Clips Or Worn Screws To Ensure Secure Mounting And Eliminate Rattles.
Why This Part Fails Most Often
- Mechanical Wear: Repeated Pivoting Causes Plastic Hinges Or Pivot Pins To Crack Or Snap.
- Broken Retaining Clips: Clips That Hold The Visor In Stowed Position Become Brittle And Lose Grip.
- Fabric And Foam Degradation: Prolonged UV Exposure And Heat Can Cause Fabric Fading, Delamination, Or Crumbling Foam.
- Impact Or Rough Use: Heavy Handling Or Accidental Force When Entering/Exiting Can Damage The Mounting Bracket.
Part Numbers 8143TG And 1618180980 Are Frequently Used When Searching For The Correct Replacement; Always Compare The Part Number And Mounting Shape To Your Existing Visor. Suitable For Garage Replacement And Straightforward For Experienced DIYers; Bring Replacement Clips If Original Hardware Is Missing.
