Description
Interior rear view mirror for PEUGEOT 3008 T84 and 5008 T87 cars
Part description
The used interior rearview mirror is intended for Peugeot 3008 T84 and Peugeot 5008 T87 cars. It is an important element of the interior equipment, which ensures an overview of the traffic behind the vehicle and contributes to safe driving and driver comfort.
This auto part is also often searched for by serial number, so it is particularly suitable for mechanics and DIYers who are looking for the right part under the designation 8153LR. A used original part is a practical choice when repairing a damaged or non-functioning mirror.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 3008 T84, Peugeot 5008 T87
- Other numbers: 8153LR
Product codes
Installation recommendations
Generally/typically for interior rearview mirror replacement, the exact procedure may vary depending on the specific design of the car and the way the part is attached.
1) Before assembly
- Check that the new used part visually matches the old part.
- Compare the shape of the mirror, the type of attachment, the base of the holder and any other elements.
- Check for damage to the joint, mirror body or mounting part.
- If the mirror includes a cover or additional mechanism, check its completeness and condition.
2) Necessary tools and materials
- set of common hand tools
- plastic crowbar for dismantling interior parts
- clean cloth or microfiber
- preparations for cleaning contact surfaces, if needed
- protective gloves
3) Step-by-step assembly procedure
- Park the vehicle in a safe place and secure it against movement.
- In the interior, create enough space for manipulation in the area of the windshield.
- Carefully remove the original interior mirror according to the type of attachment, without excessive force.
- Check the condition of the attachment point and surrounding plastic parts.
- Clean the bearing and mounting surfaces from dust, grease and dirt.
- Compare the old and new part side by side, especially the fit and range of motion of the joint.
- Place the used mirror on the prepared holder or mounting element in the same way as the original part was installed.
- Secure the mirror in the mounting position so that it fits firmly and without play.
- Adjust the base position of the mirror surface for rear view.
- Check for skipping, wobbling, or spontaneous tipping during handling.
- If the cover elements were removed during disassembly, refit them.
-
4) Post-assembly checks and function verification
- Verify that the mirror holds firmly and does not show excessive play.
- Check whether the mirror can be smoothly adjusted to the desired position.
- During a short test drive, observe whether the position of the mirror changes spontaneously due to vibrations.
- Check that the view to the rear is sufficient and that the mirror does not restrict the normal use of the vehicle.
5) The most common assembly mistakes + how to avoid them
- Exchanging the type of attachment – always carefully compare the attachment with the old part before assembly.
- Using excessive force – be careful during disassembly and assembly to avoid damaging the holder or surrounding plastics.
- Unsecured seating – always check the strength and stability of the mirror after installation.
- mechanical damage due to careless handling in the interior of the vehicle
- cracking or loosening of attachment due to age and wear
- damage when disassembling the windshield or surrounding interior elements
- excessive loading of the joint by frequent or rough adjustments
- vibration and long-term use leading to play in the mirror mechanism
