Description
Sun visor for Citroën C3 from 2009. Used part – possible contamination – needs cleaning. Stiff hinges, mirrors OK. Color FBJ – LAMA. Driver side.
Overview
OEM used driver-side sun visor designed for Citroën C3 (second generation, A51) from 2009. Built to the original specification, this visor includes the vanity mirror and rigid hinge mechanism. It is a cost-effective replacement for workshops and DIY mechanics restoring interior comfort and functionality. The part is commonly searched by product codes 8163HV and 16121658BJ, which can help you find the correct unit quickly.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C3 II (A51), from 2009
- Product Codes: 8163HV, 16121658BJ
- Other Numbers: Color Code FBJ – LAMA
- Side: Driver
Function
The sun visor protects the driver from glare and direct sunlight, improving visibility and comfort while driving. Integrated vanity mirror provides convenience for occupants. The visor mounts to the roof headliner via a pivot bracket and a support clip, allowing it to rotate down and, on many vehicles, swing to the side window.
Fitment And Compatibility
Intended for Citroën C3 second-generation (A51) models starting with the 2009 model year. Confirm that the style (driver-side, color/code FBJ LAMA) matches your vehicle’s interior trim. The listed product codes 8163HV and 16121658BJ are commonly used when searching for the exact unit.
Replacement Procedure
Basic replacement steps for experienced mechanics and competent DIYers:
- Carefully lower the visor and remove any plastic trim covers concealing the mounting screws.
- Disconnect any electrical connector if the visor has an illuminated vanity mirror (inspect wiring for damage).
- Unscrew the pivot bracket and remove the retaining clip at the opposite end of the visor.
- Fit the replacement visor by reversing the procedure: position the visor, tighten the pivot screws to secure it, reconnect any wiring, and refit trim covers.
- Check operation: pivot action, side-swing function (if applicable) and illumination of vanity lamp.
Installation Recommendations
- Handle the headliner and trim gently to avoid creases or damage during removal and installation.
- Inspect and, if necessary, replace broken clips or worn fasteners to ensure a secure fit.
- Clean the visor surface before installation to remove any dirt or staining present on this used unit.
- If the visor includes a mirror lamp, verify connector condition and test the lamp after installation.
- Use correct-size screws and avoid over-tightening to prevent damage to the bracket or headliner.
Why The Part Commonly Fails
- Mechanical Wear: Repeated use causes hinge wear or loosening of the pivot, leading to sagging or play.
- Broken Clips: Plastic mounting clips can become brittle with age and break during operation or removal.
- Interior Deterioration: UV exposure and heat can fade upholstery, weaken adhesives or cause discoloration/staining.
- Mirror Or Lamp Damage: Vanity mirror glass may crack and vanity lamp wiring or the lamp itself can fail.
- Contamination: As a used part, surface dirt or stains are possible and typically require cleaning before installation.
Notes
This is a used original equipment part. Condition details provided above originate from the part description: hinges are solid and mirrors are in working order, but cleaning is recommended prior to fitting. Searchable codes: 8163HV and 16121658BJ.
