Description
Left exterior mirror (driver’s side) for PEUGEOT 307. Electrically adjustable and heated, with electric folding to the vehicle. Color LKR – Paint Babylone Red. 7 PIN (5+2).
This replacement left mirror is designed for mechanics and experienced DIYers who need a reliable, direct-fit solution for Peugeot 307 vehicles. The unit combines electric adjustment, heating element and power-folding for convenient operation and improved safety in cold or wet conditions. It is commonly referenced under product code 8149VV and is available in different finishes — please check the color code (LKR) to match your vehicle’s paint.
Key Features
- Driver’s Side (Left) Exterior Mirror for Peugeot 307
- Electric Adjustment for precise mirror positioning
- Integrated Heating Element to clear ice and fog
- Electric Folding Mechanism for parking protection
- Painted Finish: LKR – Babylone Red
- Connector: 7‑pin (5+2)
- Typical Professional or DIY Replacement Part Number: 8149VV
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model(s): Peugeot 307 (including 307 I)
- Product Codes: 8149VV
- Other Numbers: 7 PIN (5+2); Color Code: LKR (Babylone Red)
Installation Recommendations
- Before starting, disconnect the negative battery terminal to avoid short circuits and unintended airbag deployment.
- Remove the interior door trim or triangular mirror cover following the vehicle manufacturer’s procedure to access the mirror mounting bolts and connector.
- Carefully unplug the 7‑pin connector and compare pins to ensure full correspondence (5+2 configuration).
- Support the mirror during removal to prevent damage to the glass or paint. Remove mounting nuts, fit the new mirror, and torque fasteners to manufacturer specifications if available.
- Reconnect the electrical connector, reconnect the battery and test all functions (adjustment, heating and folding) before refitting the door trim.
- Check mirror alignment and ensure the painted finish matches surrounding panels. Replace any damaged clips or fasteners removed during disassembly.
How The Part Is Replaced
Typical replacement involves removing the interior trim piece near the mirror, disconnecting the electrical connector, unbolting the mirror from the door, and fitting the new unit in reverse order. After connection, verify mirror adjustment, heater activation and folding operation. Reassemble the door trim once correct operation is confirmed.
Why This Part Fails Most Often
- Mechanical Damage: Impact or collisions commonly crack the mirror housing or glass.
- Water Ingress And Corrosion: Moisture can corrode connectors, wiring and the small electric motors, causing failures in adjustment, heating or folding functions.
- Wear Of Internal Actuators/Gears: Repeated use can wear the plastic gears inside the folding mechanism or the adjustment motor.
- Connector Or Wiring Faults: Broken pins, loose terminals or damaged wiring in the door harness lead to intermittent or total loss of function.
- Electrical Supply Issues: Blown fuses, faulty switches or relays can appear as mirror failures but originate elsewhere in the vehicle’s electrical system.
Notes For Professionals
When replacing, ensure connector pinout and available functions (heated, folding, memory if applicable) match the vehicle specification. Test all features before completing the job to avoid return visits. For painting or color-matched units, confirm the LKR color code corresponds to the vehicle’s paint.
Keywords: Left mirror, Driver side mirror, Peugeot 307 mirror, Electric folding mirror, Heated mirror, 8149VV.
