Description
Gear Shift Gate For Peugeot 308 T7 6-Speed. With Undamaged Gear Shift Knob 2403V1. Removed From A Vehicle With 64,000 Km.
The Peugeot 308 T7 gear shift gate (selector gate) is an OEM mechanical assembly that precisely guides the gear lever for smooth, reliable manual shifting. This unit includes the intact shift knob identified as 2403V1 and is a direct-fit component for 6-speed manual versions of the 308 T7. Ideal for professional workshops and DIY mechanics who need an original replacement part by reference number 9672735680 (also referenced as 2400KV / 2403V1).
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 308 T7 6-Speed
- Product Codes: 9672735680
- Additional Numbers: 2400KV, 2403V1
- Removed From Vehicle Mileage: 64,000 km
Function And Application
The shift gate locates and stabilizes the gearlever, providing defined shift gates and supporting the linkage that connects the lever to the gearbox. It contains guide plates, bushings and mounting points that maintain gear engagement precision. Correct operation is crucial for secure gear selection and to prevent mis-shifts that can damage synchromesh rings or gearbox internals.
Replacement Procedure (Overview)
- Prepare: Park on level ground, engage handbrake and, as a precaution, isolate the battery if working near electronic modules or airbags.
- Interior Disassembly: Remove center console trim and any decorative panels to access the selector housing.
- Disconnect Linkage: Detach selector cables or mechanical linkages from the gate—note positions for reassembly.
- Unbolt Gate: Remove mounting bolts securing the gate assembly to the body/floor and withdraw the unit upward.
- Fit New Unit: Install replacement in reverse order, ensure linkages are correctly seated and adjust freeplay per manufacturer procedure.
- Final Checks: Verify smooth gear engagement through all gears, confirm neutral position, and reassemble interior trim. Road-test to confirm correct operation.
- Use manufacturer-specified fastener torque values when tightening mounting bolts.
- Inspect and, if necessary, replace cable end fittings, bushings and retaining clips at the same time—worn ancillaries commonly cause poor shift feel.
- Apply appropriate lubricant to moving bushings where specified; avoid excess grease that can attract dirt.
- After installation, check gearbox shift quality at low speed before regular use.
Do not force components; use proper tools and follow manufacturer guidance for adjustment and torque settings.
Installation Recommendations
Why This Part Fails
Common failure causes include wear of plastic or rubber bushings, deformation of the guide plate from repeated heavy use, broken retaining clips, and contamination (dirt or moisture) that accelerates wear. Damage can also result from incorrect force during gear changes or from impacts to the lever. Symptoms include increased play in the lever, difficulty selecting gears, clashing when engaging gears, or the lever not returning cleanly to neutral.
What You Get
Original shift gate assembly as described above with an intact OEM shift knob 2403V1. The part is identified by product code 9672735680 (additional references 2400KV / 2403V1) and is intended for Peugeot 308 T7 6-speed manual transmissions.
Keywords For Search
Peugeot 308 gear shift gate, shift selector assembly, gear selector gate 9672735680, 2400KV, 2403V1, Peugeot 308 T7 6-speed.
