Description
Left rear lamp for Peugeot 206 Estate without bulb holder. The bulb holder with bulbs and a piece of wiring can be purchased separately under code 6350R4.
Overview
Replacement left rear tail light for Peugeot 206 Combi / Estate. This unit is a direct-fit exterior lamp housing designed for rear combination lighting (stop, tail, indicator and reverse depending on vehicle wiring). Commonly searched by part numbers 9641540677 and 6350R4, it is suitable for mechanics and experienced DIY enthusiasts looking for a reliable body lighting replacement.
Function And Application
The lamp provides rear lighting functions required for safe road operation: tail light, brake light, indicator (if applicable) and reverse light connection via the bulb holder. The supplied lamp housing does not include the bulb socket assembly or bulbs; these are available separately under code 6350R4. Ensure correct bulb types and wattages are used according to vehicle specifications when fitting the socket and bulbs.
Technical Information
- Manufacturer: Peugeot / Stellantis
- Model: 206 Estate (Combi)
- Product Codes: 9641540677
- Other Numbers: 6350R4
Fitment Notes
Designed for left rear position on Peugeot 206 Estate (Combi) bodystyle. Verify the part number against the original lamp before ordering to ensure correct fit. This lamp housing is supplied without the bulb holder/socket and associated wiring harness piece — order code 6350R4 if that component is required.
Installation Recommendations
- Disconnect the negative battery terminal before starting to avoid short circuits and protect vehicle electronics.
- Open the tailgate and remove interior trim panels to access the lamp retaining screws or nuts.
- Unscrew the fasteners and carefully withdraw the lamp assembly from the body, taking care not to damage clips or paintwork.
- Unplug the wiring connector and remove the old bulb holder if present. If your replacement unit lacks the socket, install the bulb holder (code 6350R4) and appropriate bulbs following manufacturer bulb type recommendations.
- Check rubber seals and lamp mounting clips for wear; replace seals to prevent water ingress.
- Reconnect the wiring, test all light functions (tail, brake, indicator, reverse) before final reassembly, then refit trim panels and secure fasteners to the correct torque.
- Use gloves or clean cloth when handling bulbs to avoid oil contamination which shortens bulb life.
Why This Part Commonly Fails
- Water Ingress: Damaged seals or cracked lens allow moisture inside, causing corrosion of contacts and bulb holder failure.
- Impact Damage: Rear bumper impacts or minor collisions often crack the lamp housing or break mounting tabs.
- Electrical Contact Wear: Socket corrosion or loose connectors lead to intermittent lighting or complete failure of functions.
- Age And UV Exposure: Over time plastic lenses can become brittle or discolored, reducing light output and mechanical integrity.
Practical Tips
When replacing the lamp, inspect the wiring harness for chafing and the connector for corrosion. If the original socket is damaged, replace it together with the lamp to ensure a durable repair. Keep the OE numbers 9641540677 and 6350R4 handy when searching or ordering to speed up identification.
