Description
Filter Box 1.4 VTI 70 kW 8FS V753482280 for Peugeot Citroën vehicles
This air intake filter box is a direct-fit unit for 1.4 VTI 70 kW (8FS) petrol engines used on selected Peugeot and Citroën models. Supplied with original reference numbers V753482280, 1420R2, 1420V6 and 1420T5, it houses the air filter element and the Mass Air Flow (MAF) sensor and ensures correct, metered airflow to the engine. Ideal for professional workshops and experienced DIY mechanics, the part is often searched by its product codes, so the listed references make finding the exact replacement quick and reliable.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C4 II; Peugeot 207; Peugeot 308 (1.4 VTI 70 kW, engine code 8FS)
- Product Codes: V753482280, 1420R2, 1420V6, 1420T5
- Additional Numbers: v75348280, V75348228O
Function And Benefits
The filter box secures the air filter element and isolates the MAF sensor from turbulent or unmetered airflow. It protects intake components from dust and debris, reduces intake noise and contributes to stable engine idling and optimal fuel-air mixture. Replacing a worn or damaged filter box restores correct airflow measurement and prevents related engine management faults.
Installation Recommendations
- Work With A Cool Engine And Basic Hand Tools: Ratchet set, screwdrivers and a set of Torx bits are commonly required.
- Procedure Overview: Remove engine cover if present; loosen intake hose clamps; carefully unplug the MAF sensor connector and either unclip or remove the MAF sensor from the box; release retaining clips/bolts securing the air box; remove hoses or ducts attached to the resonator; swap the old box for the new unit, ensure correct seating of seals and gaskets, reattach hoses and clamps; reconnect the MAF sensor and its connector.
- Good Practice: Replace the air filter element at the same time, inspect and clean the MAF sensor and intake hoses, and check that all clips and mounting points are intact to avoid air leaks.
- After Installation: Verify secure clamps and absence of intake leaks. If the engine management lamp remains after replacement, check for loose connectors or contaminant on the MAF sensor and clear stored fault codes with diagnostic equipment if necessary.
Most Common Failure Reasons
- Plastic Fatigue And Cracks: Heat cycles and vibration can crack the housing or break mounting tabs and clips.
- Damaged Or Missing Seals: Worn gaskets or improperly seated seals allow unmetered air, causing poor idling and incorrect air/fuel mixture.
- Contamination: Oil, dust and debris build-up can clog passages or contaminate the MAF sensor, leading to erratic engine behavior.
- Impact Or Previous Poor Repairs: Damage from collisions or incorrect repairs can deform the box or compromise fitment.
Service Interval Advice
Inspect the filter box whenever the air filter is serviced. Air filter replacement intervals commonly fall in the 20,000–30,000 km range depending on driving conditions; inspect the intake components more frequently in dusty or off-road environments.
This listing includes the most used OEM references (V753482280, 1420R2, 1420V6, 1420T5) to help professionals and DIY mechanics quickly identify the correct airbox for the 1.4 VTI 70 kW 8FS engine in Peugeot and Citroën vehicles.
