Tools, wrench, towing eye Citroën Peugeot 9675971080 9818516480 9820292980

€24.00

Stellantis CITROEN PEUGEOT
9675971080 9818516480 9820292980 671759

1 in stock

SKU: 9965-P3_K18 Category: Tags: , ,

Description

Tool set: wheel wrench, towing eye for CITROEN, PEUGEOT and other Stellantis models
Tools (Allen key) for removing and adjusting the light

Part description

The used tool set with wheel wrench and towing eye is a practical addition to missing vehicle equipment. The wrench is used to loosen and tighten wheel fasteners, while the towing eye is used to connect a towing device in a manner permitted by the vehicle manufacturer. The set is suitable for auto repair shops and drivers who want to have the necessary tools ready for an emergency.

When selecting, compare product numbers 9675971080, 9818516480 and 9820292980 and the design of the tools with the original equipment. A matching model name alone does not replace checking the wrench dimensions and the towing eye thread specification.

Technical information

  • Manufacturer: not specified; the source information lists the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER, Toyota ProAce City.
  • Part type: tool set.
  • Listed contents: wheel wrench, towing eye.
  • Condition: used auto parts.
  • Other numbers: not specified.
  • Wrench dimensions and eye thread specifications: not specified.

Product codes

  • Product codes: 9675971080, 9818516480, 9820292980.

The numbers are listed together in the source information for this offer. Their assignment to individual parts of the set and whether they are interchangeable are not specified.

Installation recommendations

In general, the following applies to this type of part: this is portable equipment, not a part intended for permanent installation. The following procedure therefore describes how to inspect, safely use and store the set. The exact method of using the wrench, attaching the towing eye and the conditions for towing depend on the specific model and vehicle configuration; follow the vehicle’s owner’s manual.

1) Before installation

  • Compare the markings and shape of the tools with the original set. For the wrench, check the size and fit on the wheel fastener; for the eye, check the diameter, thread pitch, direction and length.
  • Inspect both the wrench and the eye: they must not have cracks, significant bends or deep corrosion. Check the wrench’s working profile for wear and the eye’s thread for damage.
  • Check the vehicle manual to confirm whether towing is permitted and under what conditions. Do not use damaged tools or tools that do not match the required dimensions.

2) Tools and materials required

For preparation, have protective gloves, a cloth, a soft brush and the vehicle owner’s manual ready. Choose any additional equipment according to the intended task and the manufacturer’s instructions. The wheel wrench and towing eye are not substitutes for equipment used to safely lift and secure the vehicle.

3) Step-by-step installation procedure

  1. Park the vehicle in a safe place and secure it against unintended movement. In an emergency, first ensure the safety of people and mark the vehicle.
  2. Remove the tools, clean off any dirt, and inspect the parts subject to stress, the wrench’s working profile and the eye’s thread.
  3. Depending on the intended use, check the relevant wheel fasteners or the threaded socket designated by the manufacturer for the towing eye.
  4. When working on a wheel, fully fit the wrench onto the fastener. If there is excessive play or it does not seat properly, do not continue.
  5. Apply force to the wrench steadily and in line with its fitting. Do not strike it or use an improvised extension; when changing a wheel, follow the prescribed procedure for lifting and securing the vehicle.
  6. After working on the wheel, complete the final tightening with a suitable torque tool in accordance with the manufacturer’s specifications. A hand wrench alone does not allow the tightening torque to be determined reliably.
  7. When using the towing eye, access only the designated socket as instructed in the manual and clean its thread. Start screwing in the eye by hand; if you encounter unusual resistance, remove it and check that it is correctly aligned.
  8. Seat and secure the eye as prescribed by the manufacturer. Attach the towing device only after checking that the eye is firmly secured; do not apply a load to an eye that is only partially screwed in.
  9. Tow only in an approved manner and without shock loading. Do not use the eye for recovery unless the manufacturer expressly permits such use.
  10. After use, clean and dry the tools and inspect them again. Store them in the designated compartment so they cannot move freely while driving.

4) Post-installation checks and test drive/function check

After working on a wheel, check that it is seated correctly and tightened to the specified torque. During subsequent driving, watch for unusual vibrations or noise; if any occur, stop safely and investigate the cause. After using the towing eye, check for deformation and thread damage. Simply adding the set to the vehicle equipment does not require a test drive.

5) Common installation mistakes and how to avoid them

  • Incorrect wrench size: check that it fits fully and securely before use, otherwise the edges of the fastener may be damaged.
  • Cross-threading the eye: start by hand and never force it past resistance.
  • Eye not fully seated: always check that it is fully secured according to the vehicle manual before applying a load.
  • Tightening the wheel by guesswork alone: verify the final tightening with a suitable torque tool.
  • Shock loading and improper use: observe the intended purpose of the tools and the restrictions set by the vehicle manufacturer.

Reasons why the part gets damaged

With this type of tool, damage is generally caused by improper use or storage, not by normal storage in the vehicle.

  • Overloading the wrench when loosening seized fasteners, striking it or using an unauthorized lever can cause it to bend or crack.
  • Not fully fitting the wrench wears its working profile and damages the edges of bolts or nuts.
  • A dirty or incorrectly fitted eye thread can be damaged if it is screwed in by force.
  • Shock loads during towing or unauthorized vehicle recovery can deform the eye and damage its mounting point.
  • Prolonged exposure to moisture and dirt promotes corrosion, which reduces the usability of the thread and the strength of parts subject to stress.

Additional information

Weight 1.5 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.